| Search Results |
 |
Receiving faxes using Manual Mode L170
|
Receiving faxes using Manual Mode Press <Start> on the machine, then hang up. -or- Enter the two-digit ID code from the telephone, then hang up.
|
|
|
Fax Settings Menu L170
|
within 24 characters, including spaces. 3.TX TERMINAL ID Prints your ID (Transmitting Terminal ID ) on each page
|
|
|
RX (Reception) Settings Menu
|
RX (Reception) Settings Menu FAX /TEL AUTO SW ... MODE or FAX /TEL AUTO SW, this setting enables/ ... setting determines if the machine switches to fax receive ... time the machine rings before switching to fax receive ... REMOTE RX ID Enables/disables remote receiving. ... receiving ID . ON ... the bottom of each received fax page.
|
|
|
Connect the answering machine to the fax machine L170
|
Connect the answering machine to the extension port on the fax machine .
|
|
|
Connect the answering machine to the correct port on the fax machine L170
|
Connect the answering machine to the correct port on the fax machine .
|
|
|
Receiving faxes using FaxTel Mode L170
|
Options for FaxTel Mode When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to send a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from a telephone. Use the [RING START TIME] setting to increase the time the machine takes to check whether a call from a fax machine or a telephone.
|
|
|
Manual Sending Via the Handset
|
Manual Sending Via the Handset Use manual sending when you want to talk to the other party before sending a document, or if the other party does not have a fax machine that can receive automatically. Follow this procedure for manual sending:
|
|
|
Scanning a document into a Polling Box L170
|
Follow this procedure to store a document in the polling box. The document remains in the polling box so that other fax machines can poll it. To use polling sending, you have to previously create a polling box.
|
|
|
Memory Sending-L170
|
Memory Sending You should normally use memory sending to send documents efficiently. If [MEMORY FULL] is displayed, the machine cannot scan the documents. In this case, wait for the machine to send any faxes stored in the memory, then scan the document.
|
|
|
Common Settings Menu L170
|
Common Settings Menu the machien has finished sending faxes . ON 1
|
|
