Search Results |
|
Set RX (Receive) Start Speed to a slower setting (FAX-JX210P)
If phone line conditions are less than perfect, transmission (send) and reception (receive) problems can occur. Decrease the reception (RX or receive) speed if frequent fax transaction error messages appear on the LCD.
|
|
|
Sending a fax on the FAX-JX210P
Sending Documents If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press <Stop>, then try sending the document again.
|
|
|
Different ways to send a fax (JX210P)
If an error occurs during sending, the fax beeps intermittently for a few seconds and an error message appears on the LCD. If this happens, correct the problem and then press [Stop/Reset], then try sending the document again.
|
|
|
Initial Hardware Setup - FAX-JX210P
important: If the Holder moves to the right side, close and reopen the Cover to return the Holder to the left. reference: If an error message is displayed on the LCD, refer to .
|
|
|
Installing the cartridge FAX-JX210P
Installing the FINE Cartridge Note: * Make sure the machine is powered on and the ON lights green. * Make sure the holder has moved to the left.
|
|
|
Changing the volume settings FAX-JX200 / JX210P
Volume Control ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3
|
|
|
Setting ECM TX to ON / OFF (FAX-JX210P)
Enable / disable ECM (Error Correction Mode) when sending a fax. * Select [ON] to send faxes with error correction. If telephone line conditions are poor, the time to send a fax will take longer.
|
|
|
Uninstall / reinstall the printer driver for Windows 7 (JX210P)
Follow the steps below to uninstall the printer driver: Make sure your printer is connected and turned OFF (or the power cord is unplugged). Turn on your computer and log on as Administrator. Open the Printers
|
|
|
Installing the Driver - FAX-JX210P
Installing the Software important: Operating noise continues for about 40 seconds until the power turns off. Make sure that [ON] stops flashing.
|
|
|
Printing a report on the FAX-JX210P
TX REPORT (Transmission Report) Normally the fax does not print an activity report for transmitting, but you can set the fax to print an activity report every time you send a document. You can set the fax to print an activity report only when an error occurs during transmitting. RX REPORT (Reception Report) Normally the fax does not print an activity report for receiving, but you can set the fax to print an activity report every time you receive a document.
|
|