| Search Results |
 |
Installing the FAX L Drivers
|
... slot on your computer . ... depending on the computer you are using ... 4. Read the License Agreement ... ... . Restart your computer . ... the [Restart Computer Now (Recommended ... ... port on the computer . ... [Devices and Printers ] folder ... slot on your computer . ... depending on the computer you are using ... 4. Read the License Agreement and click [Yes]. ... 8. Restart your computer . (1) Select the [Restart Computer Now (Recommended)] check box. ... Flat end (A): Connect (A) to the USB port on the computer .
|
|
 |
User Support Tool
|
... machine and the computer with a USB ... NOTE When the machine is connected with a USB cable, [(USB connected device)] is displayed in [ Printer name]. ... NOTE When the machine is connected with a USB cable, [(USB connected device)] may be displayed in [ Printer name]. ... The message shown below is displayed on the computer when the USB cable or LAN cable becomes disconnected while the firmware is being updated. ... Cause The firmware could not be read correctly.
|
|
|
Printing onto Custom Size Paper
|
Registered custom paper sizes can be used with all printers installed on the computer you are using. Select [Custom [Name Fixed]] when you have created a custom paper size in an application. To use local paper sizes such as Government Letter, select [Custom [Name Fixed]] from [Page Size] and [Output Size].
|
|
|
Faxing Documents from Computers
|
If a printer icon is displayed in the task tray at the bottom right of your computer monitor, you can stop sending a fax from your computer . Double-click the printer icon -> click the name of the file you want to stop sending -> click [Document] -> [Cancel].
|
|
|
Uninstalling Software
|
You must be have administrative privileges on the computer . You should have the installation software (in case you want to re-install the drivers). You have closed all applications on your computer.
|
|
|
Copy Has Vertical Black Streaks
|
[ Paper Handling The feeder roller, and the scanning area are dirty. Clean the feeder roller, and the scanning area.
|
|
|
If "Memory is full." Appears
|
Print, send, or delete jobs stored in memory. Divide large documents in two and try to send them again. Reduce the scanning resolution and send the document again.
|
|
|
Sending a Fax Manually
|
] (FAX/COPY) to switch to the Fax mode screen. 4. Specify the scan settings. 5. Check for a dial tone via the handset.
|
|
|
Importing and Exporting Address Book Entries
|
] to highlight <Import/Export Address Book>, and then press [OK]. 4. Insert the User Software CD-ROM into the slot on your computer . If the CD-ROM Setup screen appears, click [Exit].
|
|
|
Menu Route Map
|
Off On Memory Lock PIN Report Print: Off, On Memory Lock Time Off On Scanning Done Volume: 1 to 5 Sound Only When Error Occurs Scanning Done Volume: 1 to 5 On
|
|
