| Search Results |
 |
Remove foreign object from paper feed area (B95)
|
is displayed, follow this procedure to remove paper or obstructions from the machine. Remove any remaing paper from the ASF. If paper is jammed in the multi-purpose tray , gently pull the paper out (in either direction) of the fax . After paper is removed from the ASF, open the document tray.
|
|
|
Removing paper jams B95
|
Remove paper jams from the machine?s interior when the machine displays [CLEAR PAPER JAM]. Gently pull any jammed paper out of the fax as shown, then press <Stop>. ... Pull the jammed paper gently in either direction. If paper cannot be pulled out, proceed to step 2. Open the document tray . Gently pull the document guides to remove the gray cover under the document tray . Gently remove the jammed paper inside the fax . Reattach the gray cover to the fax . Insert the lower tabs ( 1 ), then the upper tabs (2) into the corresponding slots. ... The fax returns to standby mode.
|
|
|
Load documents properly into the B95
|
Open the document tray , fan the documents and then align the edges before loading them into ADF. If the fax does not recognize ... ... up the document tray to open the ... ... the sheets of paper well so that ... ... edges of the paper . ... the ADF ( 1 ) until a ... For a multipage document, the pages are fed one by one from the top of the stack. ... Make sure you follow the procedure above to load documents into the document tray . If the document is not loaded into the document tray correctly, it may not be fed into the fax properly; resulting in a jam, or in pages not being sent.
|
|
|
Replace BX-3 cartridge B45 / B95
|
Replace BX-3 Cartridge ... Make sure the fax is plugged in ... ... lock lever ( 1 ) on the ... Remove the orange protective cap ( 1 ) and tape (2). ... With the label facing outwards and the slot in the cartridge aligned with the yellow post, insert the BX-3 cartridge into the cartridge holder ( 1 ). ... The fax automatically prints a test page. The fax prints a test page every time you insert a BX-3 cartridge. ... Load the paper in the multi-purpose tray before you replace the BX-3 cartridge.
|
|
|
Sending a fax using directory dialing on B95
|
This feature is convenient when you know the other party's name bur cannot recall the one-touch speed dialing button or the coded speed dialing where the number is registered. This procedure can also be used to look up the other party's name and retrieve the number for dialing. Lift up the document tray . Insert the top of the document, face up, into the ADF (1) until a beep is heard. Adjust the document guide to the width of the document.
|
|
|
Copying on the B95
|
If you make copies of multiple documents at a time, the number of pages the fax can scan into memory varies depending on the scanning resolutions as follows: Lift up the document tray . Insert the top of the document, face up, into the ADF ( 1 ) until a beep is heard. ... If the document does not eject, press <Start/Copy> for a few seconds, then the fax will feed out the document.
|
|
|
Test Fax # - Canon Fax Machines and Office All-In-Ones
|
After you have connected the fax machine to your telephone line, you can now test to see if is ready to send and receive faxes . Here’s how:
|
|
|
B95 BJ cartridge type
|
Use only a Canon BX-3 Black BJ Cartridge in your fax. Ink capacity: 900 pages (Based on the Canon FAX Standard Chart No. 1 , Standard mode.
|
|
|
Changing the volume settings B95
|
Volume Control Set the volume of the incoming ring volume. 0 (off), 1 , 2 or 3 Set the fax to ring (in FaxTel, FaxOnly) ON or OFF Set the volume of the line (Hook) monitor (sound during dialing). 0 (off), 1, 2 or 3 Set the volume of the error alarm sound.
|
|
|
Setting the B95 receive mode
|
For the fax machine to work effectively, it must be set to the proper receive mode.
|
|
