| Search Results |
 |
Changing the volume settings B95
|
Volume Control Set the volume of the incoming ring volume. 0 (off), 1, 2 or 3 Set the fax to ring (in FaxTel, FaxOnly) ON or OFF Set the volume of the line (Hook) monitor (sound during dialing). 0 (off), 1, 2 or 3 Set the volume of the error alarm sound.
|
|
|
Registering coded speed dial on B95
|
Use coded speed dialing to dial a fax number at the press of three buttons. A fax /telephone number can be registered under each two -digit code and you can register up to 70 locations. You can also register the name of the party and a voice tag, the name appears on the printout of the coded speed dialing list.
|
|
|
How to Test the Send and Receive Functions for Faxing
|
Once our service receives your fax, a test page will be sent back to the fax number programmed into your machine. This process generally takes 2 to 3 minutes.
|
|
|
Test Fax # - Canon Fax Machines and Office All-In-Ones
|
Once our service receives your fax, a test page will be sent back to the fax number programmed into your machine. This process generally takes 2 to 3 minutes.
|
|
|
Sending a fax using directory dialing on B95
|
This feature is convenient when you know the other party's name bur cannot recall the one-touch speed dialing button or the coded speed dialing where the number is registered. This procedure can also be used to look up the other party's name and retrieve the number for dialing. Press [<] or [>] to display the other names and numbers registered for the button letter group. * The names for one-touch speed dialing numbers are prefixed with two digits and the names for coded speed dialing numbers are prefixed with an asterisk (*) and two digits. * When you reach the last name and number registered for the letter group, you will return to the first name and number in the group.
|
|
|
Removing paper jams B95
|
Remove paper jams from the machine?s interior when the machine displays [CLEAR PAPER JAM]. Gently pull any jammed paper out of the fax as shown, then press <Stop>. ... If paper cannot be pulled out, proceed to step 2 . ... Gently remove the jammed paper inside the fax . Reattach the gray cover to the fax . Insert the lower tabs (1), then the upper tabs ( 2 ) into the corresponding slots. ... The fax returns to standby mode.
|
|
|
Remove foreign object from paper feed area (B95)
|
is displayed, follow this procedure to remove paper or obstructions from the machine. If paper is jammed in the multi-purpose tray, gently pull the paper out (in either direction) of the fax . ... Reattach the gray cover to the fax . Insert the lower tabs (1), then the upper tabs ( 2 ) into the corresponding slots. ... Slide the paper guide [ 2 ] snugly against the left edge of the stack.
|
|
|
Replace BX-3 cartridge B45 / B95
|
Replace BX-3 Cartridge Make sure the fax is plugged in. ... Raise the cartridge lock lever (1) on the cartridge holder and remove the BX-3 Cartridge ( 2 ). ... Remove the orange protective cap (1) and tape ( 2 ). ... Lower the cartridge lock lever ( 2 ) until you hear a click to lock the cartridge in place. ... The fax automatically prints a test page. The fax prints a test page every time you insert a BX-3 cartridge.
|
|
|
Setting the B95 receive mode
|
For the fax machine to work effectively, it must be set to the proper receive mode.
|
|
|
Set B95 to TAM Mode
|
For the fax machine to effectively switch between voice and fax messages using the built-in answering machine, it must be set to [TAM] Mode.
|
|
