| Search Results |
 |
Steam Is Emitted from the Printer Output Area (imageCLASS and Faxphone)
|
To help paper avoid moisture or dryness, keep paper in its wrapper until it is ready to be used.
|
|
|
Loading Paper in the Cassette-PC 940
|
Loading Paper in the Cassette Only load one size of copy paper into the cassette . Do not load different sizes of paper into the cassette at the same time.
|
|
|
Print Media Requirements-PC 940
|
Print Media Requirements Paper Size Cassette: Letter, Legal, Legal-statement Bypass: Legal (8 1 /2" x 14") - business card (2" x 3 1 /2") Paper Weight Cassette : 17 lb to 20 lb (64 g/m2 to 80 g/m2
|
|
|
Copying onto Various Types of Copy Stock
|
Copying onto Various Types of Copy Stock To make copies with copy stock which cannot be loaded in the cassette , such as any heavy paper or card stock, transparencies or labels, use the single -sheet bypass.
|
|
|
Installation Procedure
|
Installation Procedure Insert the copy tray so that it fits into the three holes located on the side of the copier. Make sure that the copy tray is inserted into the copier as far as it will go. Remove the packing material inside the cassette and load copy paper into the cassette .
|
|
|
Adjusting Cassette to hold different Paper Size-PC 940
|
Adjusting Cassette to hold different Paper Size
|
|
|
If Paper Jams Occur Frequently (Cleaning the Static Charge Eliminator) (PC940/PC941)
|
When a paper jam occurs, first check to make sure the copy paper fits securely in the cassette tray and that the length guides of the cassette tray are adjusted correctly. If a paper jam occurs even though the cop paper is set securely in the cassette tray, follow the procedure below to clean the static charge eliminator.
|
|
|
Removing Paper Jams
|
Inside the machine: Make sure that the height of the paper stack does not exceed the height of the length guide's claw in the cassette . Failure to do so will cause a paper jam.
|
|
|
Making Two-Sided Copies
|
Making Two-Sided Copies If the copy paper is curled, uncurl it before placing it in the cassette . Failure to do so will cause paper creases and a paper jam.
|
|
|
Closing the cassette
|
Closing the Cassette When closing the cassette, make sure to push it in completely as far as it will go, as shown below in the illustration (1). If copying is performed when the cassette is not pushed in completely, as is shown below (2), it will cause a paper jam.
|
|
