Search Results |
|
Canon Toner Cartridge Limited Warranty
... , Inc. Help Desk at 1 ... If your Cartridge is covered by this limited warranty, a new Cartridge will be returned to you without charge by Canon U.S.A., Inc., Canon Canada, Inc. or the Dealer from whom you purchased the Cartridge.
|
|
|
Cleaning the machine-PC 940
Cleaning the machine To ensure optimum copy quality, the platen glass, platen glass cover , copy tray, and single-sheet bypass must be kept clean at all times. Wipe each of these parts with a cloth dampened with water or a mild cleaning agent. Then, wipe with a dry cloth.
|
|
|
Copying Thick Books or Large Originals
Copying Thick Books or Large Originals When copying thick books, large originals, or three-dimensional objects, detach the platen glass cover .
|
|
|
Copy Yield
Copy Yield The term "A4 at 5% ink coverage" denotes an original on which the area covered with black ink is 5% of the total area of an A4-size sheet.
|
|
|
Making a Copy-PC 940
After placing the original, lower the platen glass cover . Do not copy with the platen glass cover left open; doing so will result in excessive toner consumption.
|
|
|
Copying onto Various Types of Copy Stock
Copying onto Various Types of Copy Stock Close the platen glass cover gently to avoid catching your hand, as this may result in personal injury.
|
|
|
Removing Paper Jams
Outside the machine: Open the right cover . Slowly remove any jammed paper behind the right cover. Close the right cover.
|
|
|
Steam Is Emitted from the Printer Output Area (imageCLASS and Faxphone)
To help paper avoid moisture or dryness, keep paper in its wrapper until it is ready to be used.
|
|
|
If Paper Jams Occur Frequently (Cleaning the Static Charge Eliminator) (PC940/PC941)
1. Raise the platen glass cover and remove the static charge eliminator cleaning brush that is attached to it. 2. Lift the main unit lever on the left side to open the main unit. 3. Using the brush on the tip of the static charge eliminator cleaner, sweep out the dust from the groove inside the copier.
|
|
|
Enlarging/Reducing Using the Zoom Key-PC 940
Enlarging/Reducing Using the Zoom Key The Copy quantity/Copy ratio display will display the copy quantity three seconds after you have finished setting the copy ratio and stopped pressing the <+> or <-> keys. To set the copy ratio to 120% for example, keep pressing the <+> key until 120% appears in the display. You can use the <Preset Copy Ratio> key together with the <Zoom Ratio> key to help you to set the specific copy ratio that you need.
|
|