FiltersClear
CMS-CATEGORY_REF
Content Source
Products
 
 
Pages [Next]
Search Results
CMS-XML Canon Toner Cartridge Limited Warranty
... , Inc. Help Desk at 1 ... If your Cartridge is covered by this limited warranty, a new Cartridge will be returned to you without charge by Canon U.S.A., Inc., Canon Canada, Inc. or the Dealer from whom you purchased the Cartridge.
CMS-XML Cleaning the Copier-PC 100 Series
Cleaning the Copier To ensure optimum copy quality the platen glass, platen cover , copy tray and multi-stack tray should be cleaned on a regular basis. To clean these parts, wipe with a cloth dampened with water or a mild cleaning agent and then wipe with a soft dry cloth. Clean the external housing of the copier in the same way.
CMS-XML Clearing Paper Jams-PC 100 Series
Clearing Paper Jams mark by sliding it to the left. Press the top cover release button and open the top cover of the copier. see below
CMS-XML Cleaning the Paper Roller-PC 100 Series
Cleaning the Paper Roller mark by sliding it to the left. Press the top cover release button and open the cover completely. Wipe clean the roller while turning it in the direction indicated by the arrows.
CMS-XML Copying onto Postcards, Transparencies and Other Stock-PC 100 Series
Copying onto Postcards, Transparencies* and Other Stock Place the original to be copied copy side down onto the platen glass. Gently close the platen cover . Insert the copy stock into the multi-stack tray.
CMS-XML Installation Procedure-PC 100 Series
Installation Procedure Remove the copier from its shipping bag and gently remove all the packing tape attached to the copier. Slightly slide the copy tray and the multi-stack tray out from the opening between the disc and the platen cover , and then open the trays fully.
CMS-XML Cleaning the Fiber Lens-PC 100 Series
Reverse side Open the top cover and remove the cartridge. Clean the reverse side of the fiber lens. To clean, run a cotton swab lightly over the entire length of the lens several times.
CMS-XML Normal Copying-PC 100 Series
Normal Copying Place the material to be copied face down on the platen glass. Gently close the platen cover . When copying anything out of the standard mode, be sure to set the copy exposure and number of copies.
CMS-XML Steam Is Emitted from the Printer Output Area (imageCLASS and Faxphone)
To help paper avoid moisture or dryness, keep paper in its wrapper until it is ready to be used.
CMS-XML Transporting the Copier-PC 100 Series
Fold the trays up as shown in the illustration, and insert the trays into the opening between the disc and the platen cover . Then pull out the carrying handle.
Pages [Next]