| Search Results |
 |
Log Viewer
|
... show using the filter function. [Specify type]: - To specify the log type, select the level ([ Error ], [Warning], [Information]) and output module ([Application], [HTTP Server], [System]) of the log. ... (13)[Date & Time] - Set the date and time of the log you want to show using the filter function. ... (14)[Apply filter ] - Show the filtered logs in the log display area.
|
|
|
Display Screen for VB Viewer
|
(13)Information Field - Information messages, warning messages and error messages are shown to the user. (14)[Get a Snapshot] button - A still image from the moment of clicking is displayed in a new window. (15)
|
|
|
Programing Modifiers
|
Note Õ A runtime error will occur if the specified name does not match. Õ If this modifier is not defined, Ó¥Ô will be deleted.
|
|
|
Creating a Camera Specification File
|
Up to 30 cameras can be registered. If camera information for more than 30 cameras is listed, an error will occur when the file is loaded into the Camera Angle Setting Tool.
|
|
|
[Memory Card] SD Memory Card Operations (Unmounted Status)
|
• The following settings and operations will record video on an SD memory card. - When a network error occurs during recording-mode stream - When [Video Record Action] in the [Event] menu is set to [Record to SD Card], and an event (volume detection, external device input or timer) setting is enabled and [Enable] is selected for [Video Record] - When manually recorded to SD memory card from the Admin Viewer
|
|
|
Installing the Camera (VB-H41 / VB-M40)
|
Fix the ceiling plate to the camera with the four screws (M3) included with the ceiling mount cover (sold separately). 3 Secure the safety wire
|
|
|
[Memory Card] SD Card Information
|
[Cannot Save]: Indicates that videos cannot be saved to the SD memory card. This status may be caused when the SD memory card is not mounted, the video file count upper limit has been reached, the video management file is corrupted or the card is write- protected .
|
|
|
[IPsec] Setting IPsec
|
If the camera is rebooted during auto key exchange communication, a connection error may result after rebooting. In this case, connect again.
|
|
|
[Camera] Setting Initial Camera Settings and External Device Name
|
If [Day/Night] is set to [Auto], the infrared cutoff filter may move several times while the mode is switching between [Day Mode] and [Night Mode]. Pan, tilt, zoom and manual focus will not work during this period.
|
|
