| Search Results |
 |
[Memory Card] SD Memory Card Operations (Unmounted Status)
|
( 2 ) [Operation Settings] - Set write operations to the SD memory card to [Save Log] or [Save Logs and Videos]. ... - When a network error occurs during recording-mode stream ... • When a network error occurs during recording-mode stream, video is saved in the JPEG format regardless of the [Video Format] setting (the frame rate is fixed at 1 fps).
|
|
|
[IPsec] Setting IPsec
|
( 2 ) [IPsec ... ... Select [Group 2 ] or [Group 2 ->Group ... ( 2 ) [IPsec ... ... ] in ( 2 ), set ... ... ] in ( 2 ). ... , a connection error may result after ... ( 2 ) [IPsec ... ... ] in ( 2 ), set ... (7) [Destination Subnet Mask Length] (IPv4), [Destination Prefix Length] (IPv6) - This setting is required only if [IPsec Mode] is set to[Tunnel Mode] in ( 2 ).
|
|
|
Display Screen for VB Viewer
|
( 2 ) Video Size - Set the size of video received from the camera. ... (13)Information Field - Information messages, warning messages and error messages are shown to the user.
|
|
|
Log Viewer
|
( 2 ) [Reload] - Reload the displayed log file and show the latest logs. ... [Specify type]: - To specify the log type, select the level ([ Error ], [Warning], [Information]) and output module ([Application], [HTTP Server], [System]) of the log.
|
|
|
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
|
If the name server address 1 is unavailable, the name server address 2 will be accessed. However, the name server address 2 must be set in advance
|
|
|
Programing Modifiers
|
Note Õ A runtime error will occur if the specified name does not match. Õ If this modifier is not defined, Ó¥Ô will be deleted.
|
|
|
Preset Setting Tool - Display Screen
|
Preset Setting Tool - Display Screen Preset Setting Tool has two display screens, the [Preset] tab and the [Preset Tour] tab. With the [Preset] tab, up to 20 presets and the home position are set while referring to the panorama screen or full image.
|
|
|
Accessing the Admin Tools
|
1 Start the top page of the camera 2 Click [Admin Tools]. 3 Enter a user name and password and click [OK]
|
|
|
[Maintenance] Viewing Event Logs
|
(1) [View Logs] - Display a history of camera operations and connections to each viewer, etc.( 2 ) [View Current Settings] - Display a list of current settings. (3) [Reboot] - The camera is rebooted.
|
|
|
Setting White Balance
|
The white balance is adjusted automatically. ( 2 ) [Light Source] Select the light source from the pull-down menu below according to the condition in which the camera is used.
|
|
