| Search Results |
 |
Display Screen of Camera Angle Setting Tool
|
( 13 )[Control Assist Correction] - When the orientation of the camera is moved by hand, the operation assist display will not correspond with the actual camera angle. In this case, click [Control Assist Correction] to confirm the actual camera angle and automatically correct the display position of operation assist. Operation assist correction takes about 1 minute to complete.
|
|
|
Display Screen for VB Viewer
|
( 13 )Information Field - Information messages, warning messages and error messages are shown to the user. (14)[Get a Snapshot] button - A still image from the moment of clicking is displayed in a new window. (15)
|
|
|
Connecting the Camera (VB-hH41 / VB-M40)
|
Connecting the Camera ( VB -hH41 / VB-M40)
|
|
|
Overview of Viewer
|
Accessing this viewer via a web browser allows you to display images and operate the camera. Two types of viewer are available, the Admin Viewer and the VB Viewer.
|
|
|
Preset Setting Tool - Preset Tour
|
[Not used] - Preset tour is not performed. [For Viewers] - Preset tour is performed when a camera is connected via the VB Viewer, etc. [Always] - Preset tour is always performed.
|
|
|
Installing the Camera (VB-H41 / VB-M40)
|
Cover SS40-S-VB/SS40-B-VB (sold separately). Before installing the camera, set the IP address and other network information on the camera using the “ VB Initial Setting Tool” on the Setup CD-ROM. For details on how to operate the “VB Initial Setting Tool”, see “Operation Guide”.
|
|
|
Launching the Viewer
|
1 Access “http://192.168.100.1/” via the web browser 2 Click [Admin Viewer] or [ VB Viewer] according to the user. 3 For [Admin Viewer], enter the user name and password
|
|
|
Change the Camera Angle in the Panorama Display Area
|
Users operating the camera in the VB Viewer can control the camera within the view restrictions.
|
|
|
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
|
If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Default Gateway Address] settings is wrong, network access may be disabled. In this case, see Ô?erforming Initial Settings for the CameraÔ and use VB Initial Setting Tool to set the address again.
|
|
