Search Results |
|
Connecting the Camera (VB-hH41 / VB-M40)
Connecting the Camera (VB-hH41 / VB-M40) Power Connection Power can be supplied to the camera in the three ways described as follows.
|
|
|
Notes on Power Supply (VB-H41 / VB-M40)
Warning Only use the dedicated AC Adapter PA-V17 (sold separately) for AC power . Do not set any heavy objects on the power cable.
|
|
|
[Memory Card] SD Memory Card Operations (Mounted Status)
Be sure to perform the unmount process when turning off the power to the camera or removing the SD memory card. Failing to unmount first may result in management file problems or the SD memory card becoming inaccessible
|
|
|
Display Screen of Camera Angle Setting Tool
(3) Control Assist - Displays dotted lines showing the range of pan operation and tilt operation. The camera angle cannot be changed to positions with no dotted lines.
|
|
|
External Device I/O Terminals (VB-H41 / VB-M40)
Important • When connecting sensors and switches, connect terminals that are electrically isolated from the respective power and GND.
|
|
|
Audio Input/Output Terminals (VB-H41 / vb-M40)
}20% Microphone power supply: plug-in power (voltage: 1.8 V) * Supported microphones: Condenser microphones with plug-in power support
|
|
|
Restore Settings
There is no on/off switch on the camera. Turn the camera on and off by plugging in or unplugging LAN cable (PoE power supply), AC adapter, or external power plug.
|
|
|
Installing the Camera (VB-H41 / VB-M40)
Connect the LAN cable to the camera through the wiring hole If AC Adapter PA-V17 (sold separately) or an external power supply is used, connect the power connector to the camera. Connect cables to external device I/O terminals and audio input/output terminals as necessary.
|
|