| Search Results |
 |
Part Names
|
1 Reset switch - Turn on the power while pushing this switch using a sharp object. Continue to push the switch for 5 seconds or more to restore all factory settings except for the date and time.
|
|
|
[Memory Card] SD Memory Card Operations (Mounted Status)
|
Be sure to perform the unmount process when turning off the power to the camera or removing the SD memory card. Failing to unmount first may result in management file problems or the SD memory card becoming inaccessible
|
|
|
Display Screen of Camera Angle Setting Tool
|
(3) Control Assist - Displays dotted lines showing the range of pan operation and tilt operation. The camera angle cannot be changed to positions with no dotted lines.
|
|
|
Audio Input/Output Terminals
|
• Condenser MIC IN - Input impedance (microphone bias resistance): 2.2 k? } 20% Microphone power supply: plug-in power (voltage: 1.8 V) * Supported microphones: Condenser microphones with plug-in power support
|
|
|
Restore Settings
|
There is no on/off switch on the camera. Turn the camera on and off by plugging in or unplugging LAN cable (PoE power supply), AC adapter, or external power plug.
|
|
|
Recessed Mounting Kit SR600-VB - Installing the Camera
|
When using an external power supply, guide the power interface cable through the wiring hole. Guide the I/O interface cable and the audio interface cable (included with the camera) through the wiring hole if necessary.
|
|
