| Search Results |
 |
Setting the Paper Size and Type-ICMF 6500
|
> to select [SELECT PAPER TYPE], then press <OK>. Confirm that [ CASSETTE 1 ] is displayed, then press <OK>. Press <
|
|
|
Set the Paper Type to Plain Paper-ICMF 6500
|
> to select [SELECT PAPER TYPE], then press <OK>. Confirm that [ CASSETTE 1 ] is displayed, then press <OK>. Press <
|
|
|
Clearing Paper Jams Multi-Purpose Tray-ICMF 6500
|
Clearing Paper Jams Multi-Purpose Tray When [ PAPER JAM] appears on the LCD display, remove jammed paper from inside the machine first, then from the paper cassette if necessary. Check the following if you experience repeated paper jams:
|
|
|
Loading Paper in the Cassette-ICMF 6500
|
Loading Paper in the Cassette Pull out the paper cassette . Even the edges of the paper stack. Load the paper stack print side up.
|
|
|
Remove the printouts from the paper delivery tray
|
Remove the printouts from the paper delivery tray .
|
|
|
Printing single checks using Quicken-ICMF 6500
|
Follow these directions to print a single check using Quicken. Open the Multi-purpose tray (if it is not already opened). Load the checks into the Multi-purpose tray and adjust the paper guides accordingly. Press <
|
|
|
Changing the Paper Feed Switch Priority
|
Changing the Paper Feed Switch Priority to [Speed Priority] > or < > to select the paper source , then press <OK> Press <
|
|
|
Loading Documents in the ADF-ICMF 6500
|
Loading Documents in the ADF - Do not add or remove documents while they are being scanned. - When scanning is complete, remove the documents from the document delivery tray to avoid paper jams. - Avoid using ADF to scan the same document more than 30 times.
|
|
|
Making a copy using the Multi-Purpose Tray-ICMF 6500
|
Making a copy using the Multi-Purpose Tray Load paper into the Multi-Purpose Tray. Press < Paper Select> to change the paper source . Each time <Paper Select> is pressed, the green indicator will change position.
|
|
|
Cleaning the machine -ICMF 6500
|
Fuser Roller Should this occur, clean the fusing roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper in the multi-purpose tray and start cleaning.
|
|
