| Search Results |
 |
Error: Printer Not Responding / Off-line (Configure to Correct Port) - Windows
|
If the printer doesn't respond to a print command or is off-line, the printer driver port may not be correctly configured. For example, if your printer is connected via USB but the port is configured to send print commands wirelessly, you would not be able to print. The steps below may help resolve the issue.
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
To resolve the error shown below , right-click Print Spooler service and then select Start. section, you may need to contact the hardware / software vendor for assistance in either disabling or removing the component.
|
|
|
Service Notice: Windows 10 Scanning for imageCLASS
|
... & 10 Scanning Solution Matrix below to ... ... , then the solution is to install ... ... , then the solution is to install ... ... & 10 Scanning Solution Matrix as well ... imageCLASS MF Driver Solution for USB Scanning ... to Install Patch Solution for Network Scanning ... Windows 8, 8.1 and 10 Scanning Solution Matrix 7/6/2016 imageCLASS Model ... Solution for USB Scanning ... Solution for Network Scanning or USB Scanning ... For assistance , please contact our award winning customer service below.
|
|
|
Resend the document to a G3 fax machine
|
Check with the other party and send the document to a G3 fax machine . If the other party does not have a G3 fax machine, try sending the document using a transmission mode the other party's fax machine supports.
|
|
|
PC Faxing from a Mac (imageCLASS Fax driver)
|
This article explains the basic procedure for displaying the settings screen of the driver and sending a fax from an application.
|
|
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory.
|
|
|
PC Fax-ICMF 6500
|
Sending a fax from your computer
|
|
|
Adjust VOIP (Voice Over Internet Protocol) settings.
|
Although VOIP is not supported, by adjusting the VOIP (Voice Over Internet Protocol) settings, you may be able to successfully send faxes .
|
|
|
Contact local phone company to check the telephone wall jack for low ring voltage.
|
Facsimile equipment ( fax machines ), like other telephone answering devices, require ring voltage at a telephone jack to answer automatically. The ring voltage is one of the services provided by the local phone company.
|
|
|
Registering One-Touch Speed Dialing-ICMF 6500
|
Registering One-Touch Speed Dialing Confirm that [1-TOUCH SPD DIAL] is displayed, then press <OK>. Press a one-touch speed dialing key (01 to 23) for a registering fax number , then press <OK>. You can also select one-touch speed dialing number with <
|
|
