| Search Results |
 |
Enter outside dialing prefix before the fax number
|
Enter outside dialing prefix before the fax number .
|
|
|
Sending a fax Overseas (from the U.S.) - MF5750/5770
|
Sending a fax Overseas (from the U.S.)
|
|
|
Confirming/Deleting a Fax TX Job
|
Confirming/Deleting a Fax TX Job If you want to delete the fax job, press <Set>. If you delete the fax job with multiple destinations, the machine does not send the fax to any of the destinations registered for the job. If you decide to delete the fax job, press <
|
|
|
Connect the fax to the correct phone line
|
This will occur if there are multiple lines and telephone jacks in the same location. Or if the telephone jack is wired for two lines. For example, line one is to be used for voice calls and line two is to receive faxes. Disconnect the fax machine from the telephone wall jack. Connect a known functioning single-line telephone directly to the telephone wall jack.
|
|
|
Fax Settings Menu ICMF 5700
|
1.TEL LINE SETTINGS Specifies the telephone line settings. 1.USER TEL NUMBER. Your telephone and fax number can be registered
|
|
|
Manual Sending
|
Use manual sending when you want to talk to the recipient before sending a document, or if the recipient does not have a fax machine that can receive automatically.
|
|
|
Adjust VOIP (Voice Over Internet Protocol) settings.
|
Although VOIP is not supported, by adjusting the VOIP (Voice Over Internet Protocol) settings, you may be able to successfully send faxes .
|
|
|
Contact local phone company to check the telephone wall jack for low ring voltage.
|
Facsimile equipment ( fax machines ), like other telephone answering devices, require ring voltage at a telephone jack to answer automatically. The ring voltage is one of the services provided by the local phone company.
|
|
|
Disconnect other device from the telephone line
|
Devices such as a computer modem, answering machine not connected to the fax or similar answering device may automatically pick up the call. Resend a test fax to your machine to make sure it answers. If your answering machine is not connected to the fax machine , the fax will not be able to detect the transmit signals emitted from the sending machine. Connect the answering machine to the fax as indicated, marked by a blue arrow in the magnified view.
|
|
|
Adjusting the TX REPORT Setting-ICMF 5700/8100
|
Adjusting the TX REPORT Setting The recipient's fax /telephone number (RECIPIENT ADDRESS) is not shown for the manually sent faxes . The machine does not print a TX report when faxing the documents from your computer.
|
|
