| Search Results |
 |
System Error E###-#### MF630 Series and MF730 Series
|
For all service errors turn off the main power switch to the unit. Unplug the printer and let it sit for 5-10 minutes. Plug the printer directly to a wall outlet, and power the printer back on. If the error does not clear, try to update the firmware on the device.
|
|
|
How to Activate Auto Replenishment Service (ARS) on the printer (5 inch touch screen imageCLASS)
|
screen. If an error message occurs, follow on-screen instructions
|
|
|
Process for installing an exchange machine wirelessly on Windows (MF630 Series, MF640 Series, MF730 Series, MF740 Series)
|
Part 2: Setting Up The Printer 9. Select <Yes>. If an error message is displayed during setup Select <Close>, check whether the network key is correct, and return to step 5.
|
|
|
System Error E078-0000 (MF630 Series and MF730 Series)
|
This error can be fixed by downloading and installing Firmware v06.02 or later.
|
|
|
Print Spooler service depends on RPC to be started (running)
|
If an error occurs trying to start Print Spooler service , open Computer Management and check if Remote Procedure Call (RPC) is started.
|
|
|
Fixing Unit Error (LBP7200)
|
Fixing Unit Error If a fixing unit error is displayed, you need to request service . Follow the procedure below, and then contact your local authorized Canon dealer or Canon's Contact Center at 1-800-OK-Canon to request service. 1. Turn the printer off, then disconnect the cables from the printer.
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
To resolve the error shown below , right-click Print Spooler service and then select Start.
|
|
 |
User Support Tool
|
� A critical error may occur if another computer or application communicates with the machine (for example, when printing is performed) while the firmware is being updated. In addition, do not turn OFF the machine or disconnect the interface cable (USB or LAN cable) while the firmware is being updated. If a critical error does occur (the machine is turned ON but does not start up, etc.), the machine will need to be repaired .
|
|
|
Turn the main power ON. If problem persists contact dealer or service rep.
|
TURN THE MAIN POWER ON. IF PROBLEM PERSISTS CONTACT DEALER OR SERVICE REP. Cause: An error has occurred to the machine. Action: Turn OFF the main power switch, wait for more than 10 seconds
|
|
|
Unable to scan to SMB on Windows 8.1/2012 with a send error #801 (imageCLASS)
|
The device displays error code: #801 ("Check the Server"). The cause has been found to be an issue with Windows 8.1 and Windows Server 2012 R2. The issue is described in the Microsoft Knowledge Base article 2883200 and a fix is available in the November Roll up.
|
|
