Search Results |
|
Press ON/OFF switch to reset the multifunction device
If the device is not functioning properly or to clear memory, reset it. If resetting the printer's power does not clear the error or return the machine to a functioning state, it may be necessary to attempt a service reset. for instructions to attempt a service reset.
|
|
|
Disconnect and reconnect power cord to reset the device
If the device does not respond, or to clear an error , disconnect and then reconnect the power cord.
|
|
|
Disable the "Choose paper source by PDF page size option" on the Print screen
Disable the 'Choose paper source by PDF page size' option on the Print screen If you receive the error " A paper size that cannot be fed from the cassette was selected" when printing from Adobe Acrobat Reader version 9, follow the instructions below to disable automatic paper source selection from the application.
|
|
|
Delete queued print jobs to resolve printing errors (Mac OS X)
If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued jobs. Note: After confirming that the cable is connected and that the printer is powered on, perform the following. Click here for Mac OS X 10.3.x and 10.4.x instructions. In Mac OS X 10.5.x, 10.6.x
|
|
|
Delete queued print jobs to resolve printing errors (Windows)
If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued job. If the print job does not complete, it may be necessary to disconnect the printer cable, power off and on the printer and then reconnecting the cable.
|
|
|
LCD Error Messages (MP170 / MP180)
When an error has occurs, the error or message is displayed on the LCD. Take the appropriate action to clear the message. CHECK PRINTER Turn the machine off, and remove the power plug from the outlet. About ten minutes later, plug it in again, and turn the machine on.
|
|
|
Replace ink cartridge(s) MP150 / MP170
Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears. After confirming that the printer is powered on, open the scanning unit (printer cover).
|
|
|
Front / rear / inside / operation panel view (MP170 / MP180)
is flashing: The printer is being powered on or being powered off. ... is lit: An error has occurred and printing is not possible.
|
|
|
Reseat ink cartridge (MP150 / MP170 / MP450)
Reseat ( / ) the ink cartridges if an error appears.
|
|
|
Confirm that the recommended ink cartridges are installed properly MP150 / MP170 / MP450
When replacing ink cartridges (when ink cartridges are not recognized, ink runs out, etc.), use the following ink cartridges and confirm that the new ink cartridge is installed properly. If the ink cartridge is not locked into place, the cartridge may not be detected properly, or can cause an error or keep the carriage from moving freely. / the ink cartridges if an error appears. ... After confirming that the printer is powered on, open the scanning unit (printer cover). ... After confirming that the printer is powered on, open the scanning unit (printer cover).
|
|