To resolve the error shown below , right-click Print Spooler service and then select Start. section, you may need to contact the hardware / software vendor for assistance in either disabling or removing the component. See example below.
Configure Through a Wireless LAN ... method, the wireless settings on the ... Verify the Wireless LED(Green ... Click Wireless CX Wireless Setup screen is ... ... to change the wireless settings on the ... If the wireless settings on the ... change the PC wireless settings to match ... Verify the wireless settings on the ... ... automatically changed the wireless settings on the ... ... this does not help , refer to ... Wireless Mode Select Infrastructure ... Wireless Mode Select AdHoc ... << If you did not change the wireless settings on the PC manually >> ... << If you changed the wireless settings on the PC manually >> ... Reset the wireless settings on the PC to match your network environment.
Printing a nozzle test will help determine if the ink tanks are not seated properly. Follow this procedure to print the nozzle check pattern from the machine:
Troubleshoot software installation issues Some software applications and active firewalls can cause errors, installation difficulties, or prevent services from starting. To address this issue, you can prevent the application services from starting by accessing Windows' System Configuration Utility (also referred to as 'Msconfig.exe').
Turn off USB Emulation (legacy support) in the computer's BIOS Due to differences in the BIOS setups among different manufacturers and versions, please refer to the computer's documentation or technical support for assistance in checking and changing this setting.
