Search Results |
|
Contact local phone company to check the telephone wall jack for low ring voltage.
Facsimile equipment ( fax machines ), like other telephone answering devices, require ring voltage at a telephone jack to answer automatically. The ring voltage is one of the services provided by the local phone company.
|
|
|
Unable to receive a fax. (C530,C560,C545)
I can't receive a fax. (C530,C560,C545) On the left side of the MultiPASS, connect one end of the supplied line cord to the bottom 'L' jack on the MultiPASS. Attach the other end of the line cord to the telephone wall jack. The other two jacks are pass-through ports to connect other devices to the MultiPASS and your telephone service .
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
To resolve the error shown below , right-click Print Spooler service and then select Start. section, you may need to contact the hardware / software vendor for assistance in either disabling or removing the component. See example below.
|
|
|
Check Printer appears on the C530, C560, C545 or C555
Check Printer appears on the C530, C560, C545 or C555 After printing a document, a received fax , a report or making a copy, the MultiPASS displays [Check Printer]. ... The unit requires service . ... The unit has a battery back-up for your fax's user settings (i. e. your unit's fax number , name, etc.). However, any faxes stored in memory will be lost. ... This report will provide you a listing of the faxes that were lost due to power interruption. Contact the parties on this list to have them resend you the faxes .
|
|
|
Enter outside dialing prefix before the fax number
Enter outside dialing prefix before the fax number .
|
|
|
Verify the fax number to send to is correct
Contact the party to receive the fax and verify the fax number .
|
|
|
Vertical black lines appear when I make a copy or transmit a fax
|
|
Sending faxes using Group Dialing - C530 / C545 / C555 / C560 / C755
|
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory.
|
|
|
Verify the remote fax machine is set to answer automatically
[BUSY/NO SIGNAL] will appear on the display (or #018 will appear on an Activity Report) for several reasons: The remote fax is not answering (disconnected, set to not answer automatically, memory is full, etc.). The fax number being dialed is incorrect. The fax number being dialed is busy.
|
|