| Search Results |
 |
Disconnect non standard fax protocol device from line
|
Disconnect non standard fax protocol device (i. e . PC data modem, credit card machine, etc.) from line. The fax will only communicate with ITU- T standard fax protocol devices.
|
|
|
Resolving "Error 1 Incorrect Function"
|
Attempting to print from a Windows XP computer with a firewall protection program installed, the following messages may appear. Program Name Service / Program Implements the NT service that starts the server MPService MultiPASS Fax ReDirector Fax ReDirector (MultiPASS F 80 / F 50) Spooler SubSystem App Spooler MultiPASS Toolbar MultiPASS Toolbar
|
|
|
Check Printer appears on the C530, C560, C545 or C555
|
Check Printer appears on the C530, C560, C545 or C555 The unit has a battery back-up for your fax's user settings (i. e . your unit's fax number , name, etc.). However, any faxes stored in memory will be lost. Once power is restored and the unit is able to print, a Memory Clear report will print.
|
|
|
Scanning with the MultiPASS Toolbar (Windows)- C555 / C755 / C530 / C560
|
Scanning with the MultiPASS Toolbar The Scan to Fax, Scan to Mail, Scan Text, Scan Photo, and Custom buttons enable you to scan a document or image to a particular destination. For example, you may want to scan a document, and immediately send it as a fax or attach it to an e -mail message. To successfully scan to mail, your default e-mail application must be MAPI-compliant.
|
|
|
Enter outside dialing prefix before the fax number
|
Enter outside dialing prefix before the fax number .
|
|
|
Verify the fax number to send to is correct
|
Contact the party to receive the fax and verify the fax number .
|
|
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory.
|
|
|
Verify the remote fax machine is set to answer automatically
|
[BUSY/NO SIGNAL] will appear on the display (or #018 will appear on an Activity Report) for several reasons: The remote fax is not answering (disconnected, set to not answer automatically, memory is full, etc.). The fax number being dialed is incorrect. The fax number being dialed is busy.
|
|
|
Connect the fax to the correct phone line
|
This will occur if there are multiple lines and telephone jacks in the same location. Or if the telephone jack is wired for two lines. For example, line one is to be used for voice calls and line two is to receive faxes. Disconnect the fax machine from the telephone wall jack. Connect a known functioning single-line telephone directly to the telephone wall jack.
|
|
|
Enable the PHOTO INK PRINT setting - C755 / C555
|
RX (Reception) Settings Menu ... If you select FAX /TEL AUTO ...
|
|
