| Search Results |
 |
How to Test the Send and Receive Functions for Faxing
|
Once our service receives your fax , a test page will be sent back to the fax number programmed into your machine. This process generally takes 2 to 3 minutes.
|
|
|
Test Fax # - Canon Fax Machines and Office All-In-Ones
|
Once our service receives your fax , a test page will be sent back to the fax number programmed into your machine. This process generally takes 2 to 3 minutes.
|
|
|
Change the fax settings - MX350
|
Reception settings Out of area no Selects whether to reject a phone call or fax reception out of the subscribed service area. Rejected no
|
|
|
MX350: Problems Receiving Faxes
|
note: If you have subscribed to Duplex Ringing service in Hong Kong, the machine will receive faxes automatically even if you set the receive mode of the machine to TEL priority mode. When the answering machine is connected to the machine
|
|
|
How to resolve error 5100 on an MX350
|
There are several reasons for error 5100 to appear. This article provides you recommendations with links to clear the message. If the above recommendations do not help you resolve the error, the printer will require servicing .
|
|
|
Setting the fax receive mode MX350
|
Setting the DRPD Ring Pattern (US and Canada only) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your machine will automatically monitor the ring pattern, and will automatically receive the fax if the ring pattern is a fax call.
|
|
|
Contact local phone company to check the telephone wall jack for low ring voltage.
|
Facsimile equipment ( fax machines ), like other telephone answering devices, require ring voltage at a telephone jack to answer automatically. The ring voltage is one of the services provided by the local phone company.
|
|
|
Initial Hardware and Fax Setup - MX350
|
Prepare the Machine 2 Open the Paper Output Tray (A). 3 Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C). Close the Document Cover (D) and lift it with the Scanning Unit (Cover).
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
To resolve the error shown below , right-click Print Spooler service and then select Start. section, you may need to contact the hardware / software vendor for assistance in either disabling or removing the component. See example below.
|
|
|
Fix a Cannot Communicate With The Printer Error - PIXMA MG, MP, MX Series
|
If the issue isn't resolved Select Canon XXX MP Drivers (where XXX is your model name), and then select Uninstall The printer driver, XPS printer driver, ScanGear (scanner driver), and fax driver will be deleted when you uninstall the MP drivers.
|
|
