| Search Results |
 |
Move or Ship the Printer - LX-D5500 / LX-P5510
|
When printing is in progress or any error has occurred, [Moving The Printer] cannot be executed. ... Be sure to lift the printer with 2 people, grasping the handles located on the base from both sides, in a firm embrace. ... When printing is in progress or any error has occurred, [Shipping The Printer] cannot be executed.
|
|
|
Error / Warning Messages - LX-D5500 / LX-P5510
|
Operator Call Error Error Message Error Content ... configured by the application software or printer ... If the application software or printer ... Monitor's [Cancel Print Job] and print again after correctly ... ... configured by the application software or printer ... If the application software or printer ... Monitor's [Cancel Print Job] and print again after correctly ... ... If the same error occurs again, ... ... set by the application software or printer ... If the application software or printer ... Monitor's [Cancel Print Job] and print again after correctly ... Paper load error . ... ink available for printing . ... ink tank setting error .
|
|
|
Loading Paper LX-D1300 / LX-P1300
|
Loading Paper When replacing the paper before finishing printing, set new paper which is of the same type and size as that of the paper to be replaced. Using new paper of a different type or size could cause a printing error
|
|
|
Adjust the Print Head Position - LX-D5500 / LX-P5510
|
Detailed printhead position adjustment pattern Select the printer or a file (*.txt) as the output destination. The setting information cannot be printed if an error has occurred or while the printer is printing . Close the status monitor if it is running.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
Viewing the Printer Status An error message is displayed with the printer status, printing cannot be completed when an error is issued. Troubleshoot the problem as required.
|
|
|
Use the Printer Driver - LX-D5500 / LX-P5510
|
Placing the Printer in Sleep Mode When printing is in progress or an error has occurred, the printer cannot be switched to sleep mode. The printer enters sleep mode automatically when it has been left idle for a certain period of time under normal operating conditions. By default, the sleep timer is set to 4 minutes.
|
|
|
Basic Printing Operations - MK3000
|
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. It is recommended to refer to the preview to make sure that no characters are missing before printing.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
|
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed When a paper jam occurs during printing , the printing is interrupted and the Status Monitor will display an error message such as “Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Printing on Tubes and Clear Tubes (Installing Cassettes / Inserting the Tube) - Mk2600
|
Inserting the Tube Insert the tube with the warp oriented as shown in the figure. If the tube is inserted in a wrong orientation, it can jam and cause a feed error .
|
|
