| Search Results |
 |
How to Use imagePROGRAF Firmware Update Tool (Version 24.00 or later) (Windows)
|
Read the [License ... ... copied to your computer and the finished ... ... to restart the computer immediately or to restart the computer later, and ... ... must restart your computer before updating the ... Connect the printer and computer via either the ... and put the printer in the online ... ... Internet, a printer search is performed ... ... A list of printers that were found ... ... ] field of printers where a newer ... Click the printer to update the ... ... transferred to the printer . ... displayed on the printer Control Panel and ... ... overwritten, the printer restarts. Once the printer has restarted, ...
|
|
|
How to Use imagePROGRAF Firmware Update Tool (Mac)
|
Update the firmware using the Firmware Update Tool. Connect the printer and computer via either the USB or network interfaces and put the printer in the online state in advance. Exit all other running programs.
|
|
 |
Statement of Volatility
|
・ Data Write Method: The boot program will read the printer control firmware from the Flash ROM and write it to the SDRAM. Image data will also be electrically written in the SDRAM temporarily when printing is performed.
|
|
|
Banding Adjustment (Print Quality Adjustment) (iPF830/iPF840/iPF850)
|
There are two modes of automatic adjustment to correct banding: [Auto(GenuinePpr)] and [Auto(OtherPaper)]. In either mode, the printer prints and reads a test pattern for automatic adjustment of the feed amount.
|
|
|
How to clear print job
|
Print jobs are displayed in the imagePROGRAF Printmonitor window from the moment the printer starts receiving the print data until the moment printing is finished. They are not displayed before print data is sent to the printer , even if the computer has started preparing the print data.
|
|
|
PosterArtist - Producing Enlarged Copies
|
(2) Start/exit PosterArtist QuickCopy C. Detailed settings If necessary, you can switch to a different printer or scanner or specify image correction during scanning . D. Print Settings
|
|
|
PosterArtist Basics
|
PosterArtist settings Test printing is printing posters on A4 or Letter paper to check the layout and appearance beforehand. Select a printer for test printing from the list of Canon printers connected to the computer .
|
|
|
Error message list of the printer and countermeasure (iPF830/iPF840/iPF850)
|
Corrective Action The indicated roll is specified for a print job sent from a computer , but that roll is not loaded. Press
|
|
|
Printed colors are inaccurate (iPF830/iPF840/iPF850)
|
In the [Advanced Settings] of the printer driver, access [Color Settings] in [Color Mode] to adjust colors. Colors have not been adjusted on the computer or monitor. Refer to the computer and monitor documentation to adjust the colors.
|
|
|
Colors in printed images are uneven (iPF830/iPF840/iPF850)
|
2. Change the type of paper in the printer driver and try printing again. [ Scan Wait Time] > [Area] in the Control Panel menu is set to [Leading edge]. When [Scan Wait Time] > [Area] is set to [Leading edge], colors may be uneven 110–140 mm from the leading edge.
|
|
