Read the [License ... ... copied to your computer and the finished ... ... to restart the computer immediately or to restart the computer later, and ... ... must restart your computer before updating the ... Connect the printer and computer via either the ... and put the printer in the online ... ... Internet, a printer search is performed ... ... A list of printers that were found ... ... ] field of printers where a newer ... Click the printer to update the ... ... transferred to the printer . ... displayed on the printer Control Panel and ... ... overwritten, the printer restarts. Once the printer has restarted, ...
Update the firmware using the Firmware Update Tool. Connect the printer and computer via either the USB or network interfaces and put the printer in the online state in advance. Exit all other running programs.
Data Written Method The boot program will read the printer control firmware from the Flash ROM and write it to the DRAM. User printing data will also be written in the DRAM temporarily when printing is performed.
(2) Start/exit PosterArtist QuickCopy C. Detailed settings If necessary, you can switch to a different printer or scanner or specify image correction during scanning . D. Print Settings
PosterArtist settings Test printing is printing posters on A4 or Letter paper to check the layout and appearance beforehand. Select a printer for test printing from the list of Canon printers connected to the computer .
and you load roll paper with a printed barcode, the media type and remaining amount are automatically detected after the roll paper is loaded. The barcode will be cut off after it has been read .
