| Search Results |
 |
Use a custom paper size (Mac OS X) Pro9000 Mark II / Pro9500 Mark II
|
Instructions to set a custom paper size in Mac OS X. You can choose non-standard paper sizes for printing tasks by specifying custom sizes in inches or millimeters. Rear Tray - 3.50 to 12.95 in for width and 5.00 to 26.61 in for height If a size is selected that is outside of the ranges above, there is no error , but the size and orientation of the printed image will be unpredictable.
|
|
|
Resolve Alarm Lamp Errors - PIXMA PRO-100 Printer
|
Table 1: Alarm lamp flashes orange If the inner cover is closed when starting disc label printing, open the inner cover, place the disc tray, then tap RESUME/CANCEL (see slide images below). When you start printing on paper, close the inner cover, then tap RESUME/CANCEL
|
|
|
Use the Printer's Status Monitor to Track Print Jobs - Windows
|
Launch the Status Monitor The status of the machine and ink displays in pictures and messages. ... an error occurs, the Monitor displays the details and tells you how to fix it.
|
|
|
Launch Easy-PhotoPrint Pro from Mac OS X
|
Easy-PhotoPrint Pro is plug-in software (*1). Therefore, you cannot launch Easy-PhotoPrint Pro alone; launch it from Adobe Photoshop or Digital Photo Professional. Display one image or more before launching Easy-PhotoPrint Pro. ... - When the printer driver supporting Easy-PhotoPrint Pro has not been installed, the following error message is displayed, and Easy-PhotoPrint Pro fails to be launched. ... - When trying to launch Easy-PhotoPrint Pro without any images displayed, the message below appears and Easy-PhotoPrint Pro will not be launched. Launch Easy-PhotoPrint Pro after opening any image (s).
|
|
|
Load paper correctly into the Front Feeder - Pro9500 / Pro9500 Mark II
|
When printing on heavy or thick paper, load paper into the front feeder using the instructions below: Lift the tray; if the tray is properly lifted, the Front Feed button will be lit ( image 6) While holding the tray at the level the button was lit, open up the tray; then, the printer will be ready for front paper feeding ( images 7 - 10) ... If the Alarm lamp of the printer is flashing for three times at a time, after opening the rear support, press the Resume/Cancel button to release the error .
|
|
|
Network Printer is Not Detected in Print Studio Pro (Mac)
|
Before Starting If you receive the following error when attempting to use Print Studio Pro with your printer: ... If the driver version is similar to the image above, Print Studio Pro will not recognize the printer. ... If the driver version number is similar to the one in the image above, then the correct driver is being used.
|
|
|
Cleaning the encoder (timing) strip - (PRO-10 / PRO-100)
|
Grease on the timing strip may result in poor print quality including; mis-aligned or distorted characters, vertical lines or, in some cases, an inoperable error condition (such as 5100) or knocking / grinding noise. ... The following images are from various printer models. ... Printing this document is a good test since it contains text and images .
|
|
|
Set the Ink Intensity (Windows)
|
The Intensity setting controls the amount of ink placed on the paper. The higher the intensity the darker (more ink) the printed image will be. If the Intensity setting is set too high, the printed page may become too wet and curl or streak. Follow the instructions below to adjust the ink intensity settings.
|
|
|
Set the Ink Intensity (Mac OS X)
|
The Intensity setting controls the amount of ink placed on the paper. The higher the intensity the darker (more ink) the printed image will be. If the Intensity setting is set too high, the printed page may become too wet and curl or streak. Follow the instructions below to adjust the ink intensity settings in the Mac OS X operating system.
|
|
|
If the image prints black and white instead of color, turn off Grayscale Printing (Windows)
|
Follow the steps below to change the Grayscale Printing option: For Windows Vista: Click / Select 'Start' from the bottom left of the Windows screen, ' Control Panel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.
|
|
