| Search Results |
 |
Alarm Lamp Flashes (2) two times (PRO-10 / PRO-100)
|
Alarm Lamp Flashes Two Times Flashes on Printer (Two) Support Code on computer (1000, 1001, 1002, 1006) Possible Cause:
|
|
|
PRO-100 Support Codes
|
Press the RESUME/CANCEL button to dismiss the error , then load two sheets of A4/Letter-sized plain paper on the rear tray with the printing side (whiter side) facing UP.
|
|
|
Resolve Alarm Lamp Errors - PIXMA PRO-100 Printer
|
Table 1: Alarm lamp flashes orange Tap RESUME/CANCEL to dismiss the error , then load two sheets of A4/Letter-sized plain paper on the rear tray with the printing side (whiter side) facing up
|
|
|
Alarm Lamp Flashes (11) Eleven Times (PRO-10 / PRO-100)
|
Alarm Lamp Flashes Eleven Times Paper of size other than A4 or Letter is loaded in the rear tray. Press the RESUME/CANCEL button to dismiss the error , then load two sheets of A4/Letter-sized plain paper on the rear tray with the printing side (whiter side) facing UP. For Automatic Print Head Alignment, always load paper in the rear tray.
|
|
|
Paper Does Not Feed Properly/"No Paper" Error Occurs - PRO-100
|
Summary See Also Cause Check 2 : Make sure of the following when you load paper Summary In the rear tray:
|
|
|
Firmware Information and Updating (Windows) - PRO-100
|
If an error message is displayed, ... Cause ( 2 ): The ... ... contents of Step 2 ... may cause an error . ... update, the error lamp on the ... Error Causes and Corrective Actions If an error is detected during operation of the Printer Update Utility, an error message is displayed. If an error message is displayed, perform the operation described in the message instructions. The following table lists the causes and corrective actions of the main error messages that may be displayed. ... Two or more printers to be updated are connected to the computer. ... An error occurred during the printer function update.
|
|
|
Firmware Information and Updating (Mac) - PRO-100
|
Firmware Version Update Procedure If an error message is displayed, the possible causes are as follows: ... Cause ( 2 ): The downloaded update file is for a different printer.
|
|
|
Alarm Lamp Flashes (9) Nine Times (PRO-10 / PRO-100)
|
Alarm Lamp Flashes Nine Times Support Code on computer (2001) ... Possible Cause # 2 : ... Possible Solution # 2 : ... If the error is not yet resolved, check if you can print another photograph.
|
|
|
Paper Jams - PRO-100
|
2 . Pull the ... ... printer in step 2 , all print ... ... the paper jam error continues after removing ... 2 . Open the top cover and the inner cover (the cover of the disc tray). ... Summary If you cannot remove the paper or the paper tears inside the printer, or if the paper jam error continues after removing the paper, service is required. ... Check 2 : Are there any foreign objects in the rear tray or the manual feed tray?
|
|
|
Alarm and power light flash alternately (PRO-10 / PRO-100)
|
=> If there is only one click when the lever is lowered, the lever will contact the carriage, causing the error . ... To resolve this issue of the carriage error or noise, first check the Print Head Lock Lever condition. ... ( 2 ) Open the Top Cover.
|
|
