| Search Results |
 |
Perform print head cleaning BJC-610 / BJC-620
|
Perform Print Head Cleaning Make sure printer is turned on . Press the <PRINT MODE> and < > buttons at the same time.
|
|
|
Enable/Disable Auto Power (Mac OS X)
|
This feature allows you to turn the printer off when no data is sent to the printer for a certain period of time.@@160@@ The Auto Power On function automatically turns on the printer upon receipt of print data from the computer.
|
|
|
Replace the Ink Tank(s)- BJC-85
|
Installing / Replacing Ink Tanks Skip to step 4 if installing ink for the first time 1. Make sure that the printer is turned on and open the cartridge cover. 2. Press the <CARTRIDGE> button to move the cartridge holder to the center.
|
|
|
Press the RESUME button to continue. Replace Ink Tank(s) as soon as possible - BJC-85
|
Untitled Document If the low-ink alert has been turned on , the orange ERROR light will flash and tell you which ink tank is low by the number of flashes. You can continue the print job until the ink runs out by pressing the <RESUME> button, but immediate replacement of the ink tank is recommended. Use the printer driver or the printer' s operation panel to reset the low-ink alert after replacing the ink tank.
|
|
|
Using IS Scan as a standalone scanning application- Mac
|
Scanning Images With IS Scan Starting IS Scan 1. Turn on the printer and install the scanner cartridge. 2. Double-click the 'IS Scan BJC-2100' folder.
|
|
|
Perform print head cleaning BJC-600 / BJC-600e
|
EXTENSIVE CLEANING Make sure the printer is turned on .
|
|
|
How to Perform Print Head Cleanings
|
How to Perform Print Head Cleanings Make sure printer is turned on . Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned.
|
|
|
Setting / Using the Low Ink Warning - BJC-85
|
Using the Low-Ink Alert This printer employs a low-ink alert that warns you when ink in an ink tank runs low. Before the printer is shipped from the factory, the low-ink alert is turned off. To turn on the low-ink alert manually, follow these steps:
|
|
|
Performing a Print Head Deep Cleaning - BJC-85
|
Cleaning the Print Head produce a satisfactory Nozzle Check Pattern. 1. Make sure that the printer is turned on . 2. Press and hold down the <RESUME> button until you hear the required number of beeps and then release it.
|
|
|
Installing the USB printer driver in Windows 98 with Canon Printer CD-ROM
|
How do I install the USB printer driver in Windows 98 with Canon Printer CD-ROM? Be sure your Canon printer is connected to your computer via the USB port. Turn on your computer and let it boot up . After your computer has fully booted, turn on your printer.
|
|
