| Search Results |
 |
Verify connections and IS Scan installation
|
One or more of the following should resolve the issue you are experiencing: For parallel users, make sure your parallel port mode is set for ECP in your computer's BIOS. You may need to contact your computer manufacturer's technical support for assistance.
|
|
|
Check the driver and port settings BJC-Printers
|
Solution Reboot your computer and reset the printer . ... can reset the printer by unplugging the printer for 30 seconds ... ... make sure the printer is connected directly ... back of the computer and not going ... Make sure to disable any other programs that may be attempting to access the parallel port, such as parallel port scanners, tape backup drives, or other printers . ... Right click the My Computer icon and click Properties. ... The device status should read "This device is working properly". If it does not, please contact your computer manufacturer.
|
|
|
Check the parallel port connection and settings
|
You may use the following instructions as a guideline to resolve the issue: ... make sure the printer cable is connected ... back of the computer and not going ... ... , or other printers . ... click the My Computer icon and click ... ... device status should read "This device ... ... please contact your computer manufacturer.) ... and reinstall the printer driver. ... or delete the printer driver ... point to BJ Printer , then click ... ... , then click Printers . Do the following to reinstall the printer driver ... Insert the Canon CD that came with your printer . ... where "x" is the drive letter of your computer's CD-ROM drive (your CD-ROM drive may have a different drive letter).
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
... Make sure the printer cable is connected ... back of the computer and not going ... ... , or other printers . ... on the My Computer icon, and ... ... device status should read "This device ... ... please contact your computer manufacturer. ... selected within the printer driver. a. Click the Windows Start button, select Settings and then click Printers . b. Click your right mouse button on the icon for your printer , and then click Properties on the menu that appears. ... 7. If you are using a parallel connection, please make sure the parallel cable is securely fastened to the computer and printer .
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error ... line that will read something like: ... xxxx with the printer model being installed ... ... the line that reads "Rendering Subsystem ... ... to the " Printers " window, ... Click on Apply and then OK. Re-boot the computer . ... 4) If the symptoms persist, remove the Canon printer driver from the " Printers " window. Re-boot the computer , and proceed with the re-installation of the Canon printer driver.
|
|
|
Disable third-party software to avoid installation or printing conflicts
|
Using Msconfig - System Configuration Utility when prompted to restart your computer . Attempt to install, print, scan or complete the original task you began. If installation, printing or scanning is unsuccessful, open System Configuration Utility ... when prompted to restart your computer . Attempt to install, print, scan or complete the original task you began.
|
|
|
Disconnect data cable and power cord to reset the device
|
If you've waited until the print, scan or fax (if applicable for your model) job has completed and you are certain there are no more jobs to complete, disconnect the interface (data) cable and power cord to power off the device. Shut down the computer . ... Turn on the computer .
|
|
|
Scanning an image with IS Scan - Mac
|
Scanning an Image Place the object to be scanned in the printer and then click the 'Prescan' button. You see the image displayed in the Preview Area.
|
|
|
Set a Printer as Default on a Windows Computer
|
Learn how to set the default printer from a Windows computer .
|
|
|
The Printer or Computer Shows that the Printer's Waste Ink Absorber is Full
|
If you receive a message on your printer (such as 5B00 ) or computer indicating that the printer's waste ink absorber is full, the printer will require replacement.
|
|
