| Search Results |
 |
Enable/Disable Auto Power (Mac OS X)
|
This feature allows you to turn the printer off when no data is sent to the printer for a certain period of time.@@160@@ The Auto Power On function automatically turns on the printer upon receipt of print data from the computer.
|
|
|
Replace the Ink Tank(s)- BJC-85
|
Installing / Replacing Ink Tanks Skip to step 4 if installing ink for the first time 1. Make sure that the printer is turned on and open the cartridge cover. 2. Press the <CARTRIDGE> button to move the cartridge holder to the center.
|
|
|
Press the RESUME button to continue. Replace Ink Tank(s) as soon as possible - BJC-85
|
Untitled Document If the low-ink alert has been turned on , the orange ERROR light will flash and tell you which ink tank is low by the number of flashes. You can continue the print job until the ink runs out by pressing the <RESUME> button, but immediate replacement of the ink tank is recommended. Use the printer driver or the printer' s operation panel to reset the low-ink alert after replacing the ink tank.
|
|
|
Setting / Using the Low Ink Warning - BJC-85
|
Using the Low-Ink Alert This printer employs a low-ink alert that warns you when ink in an ink tank runs low. Before the printer is shipped from the factory, the low-ink alert is turned off. To turn on the low-ink alert manually, follow these steps:
|
|
|
Performing a Print Head Deep Cleaning - BJC-85
|
Cleaning the Print Head produce a satisfactory Nozzle Check Pattern. 1. Make sure that the printer is turned on . 2. Press and hold down the <RESUME> button until you hear the required number of beeps and then release it.
|
|
|
Improving Print Speed in Windows
|
Methods to Improve Print Speed in Windows On the keyboard, press Ctrl-Alt-Delete. This will bring up the Close Program window. If you have no programs running from your Start menu, all programs displayed are running in the background.
|
|
|
Disconnect data cable and power cord to reset the device
|
If you've waited until the print, scan or fax (if applicable for your model) job has completed and you are certain there are no more jobs to complete, disconnect the interface (data) cable and power cord to power off the device. If the device powers off, press <ON/OFF> to power the device back on. Reconnect the interface cable (and telephone line cord - if applicable) to the device. Turn on the computer.
|
|
|
Replace / install the BJ Cartridge ( Print Head ) Properly- BJC-85
|
Installing / Reinstalling BJ Cartridge ( Print Head ) Removing the Cartridge ( Print Head ) 1. Make sure that the printer is turned on , then open the cartridge cover. 2. Press the CARTRIDGE button to move the cartridge to the center.
|
|
|
Start Windows Print Spooler Service (Windows 7 / Vista/XP/2000)
|
In Computer Management applet, start Windows Print Spooler service.
|
|
|
Turn the printer off for at least 15 minutes
|
The printer does not start or printer stops during print jobs
|
|
