Search Results |
|
Methods to Improve Print Speed in Windows
Methods to Improve Print Speed in Windows On the keyboard, press Ctrl-Alt-Delete. This will bring up the Close Program window. If you have no programs running from your Start menu, all programs displayed are running in the background.
|
|
|
Installing the printer in Windows XP
How do I Install the printer driver in Windows XP? 9. Select whether or not you want the printer to be the default printer and click Next. 10. If your printer is turned on and connected, select Yes to print a test page and click Next. 11. Click Finish to complete the installation.
|
|
|
BJC-70 Error Codes
BJC-70 Error Codes 1. ROM & RAM errors may not be indicated. 2. Ink Low Warning enabled when the Ink Low detection is turned on ()
|
|
|
Using the BJ Setup Utility
How to enable, disable, and change some parameters in the BJ Setup Utility ***IMPORTANT*** Whatever changes need to be made in the BJ Setup Utility, before beginning, be sure that the printer is turned ON and is connected to the computer.
|
|
|
Installing the Windows XP Driver
Installing the Windows XP Driver To verify that the driver is installed: 1. Click the Windows Start button. 2. Click Control Panel.
|
|
|
Verify connections and IS Scan installation
One or more of the following should resolve the issue you are experiencing: Make sure you have the IS Scanner Cartridge installed properly in the printer before starting IS Scan.
|
|
|
Check the parallel port connection and settings
You may use the following instructions as a guideline to resolve the issue: Click the Windows Start menu, point to Programs, point to BJ Printer, then click Uninstall.
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
6. Make sure the correct printer port is selected within the printer driver. a. Click the Windows Start button, select Settings and then click Printers. b. Click your right mouse button on the icon for your printer, and then click Properties on the menu that appears.
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error 3) Next, go back to the "Printers" window, enter Microsoft Fax or Bitfax driver properties and, under the "Details" tab, in the box named "Print to the following port", choose either the COM port onto which the modem is installed or, if not known, choose "File". Click on Apply and then OK. Re- boot the computer.
|
|