| Search Results |
 |
Lithium Battery Flight Restrictions - Printers/Fax
|
Lithium Battery Flight Restrictions - Printers/Fax mini260 FAX (see Table 2 ) Lithium-metal battery ( button cell for memory backup)
|
|
|
Installing the Windows XP Driver
|
Installing the Windows XP Driver 2 . Click Control Panel. 3. Click Printers and Other Hardware, and then Printers and Faxes .
|
|
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error ... manifests itself in two different manners: 2 ) As soon ... 2 ) If, ... 3) Next, go back to the "Printers" window, enter Microsoft Fax or Bitfax driver properties and, under the "Details" tab, in the box named "Print to the following port", choose either the COM port onto which the modem is installed or, if not known, choose "File".
|
|
|
Purchasing supplies and accessories.
|
Where Can I Purchase Supplies and Accessories? The Canon eStore is an easy way to buy Bubble Jet printers, scanners, multifunction printers and facsimile machines , as well as supplies and accessories (like ink and paper) for these products. The eStore Web site can be found at:
|
|
|
Serial Number Location - BJC-50 / BJC-55
|
The serial number is a combination of 3 or 4 letters followed by 5 numbers.For example: ABC12345 or ABCD12345Please see the illustration below for help locating the serial number.
|
|
|
Performing a Print Head Cleaning - BJC-50 / BJC-55
|
Cleaning the Print Head There are two methods for cleaning the print head. Print Head Cleaning: Use this method to clean the print heads.
|
|
|
File Size of the Scanned Image is Too Large
|
The File Size of the Scanned Image is Too Large The issue you are experiencing can be resolved in two ways: 1. Lower the scanning resolution. The lower the resolution the smaller the file size.
|
|
|
How to Perform Print Head Cleanings
|
How to Perform Print Head Cleanings Make sure printer is turned on. Press and hold the RESUME button for at least two seconds until the printer beeps twice. The POWER light will blink for several seconds while the print head is being cleaned.
|
|
|
Perform White Level calibration
|
Perform White Level calibration 1. Before you scan a document that needs extremely accurate color reproduction. 2 . If you see that the color reproduction in a scanned image is not accurate. 3. If you see that that colors in the scanned image are uneven.
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
2 . Reboot your computer and reset the printer. You can reset the printer by unplugging the printer's power cord for 30 seconds and then powering the unit on again.
|
|
