| Search Results |
 |
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error
|
Rendering Subsystems may be causing a 'Windows was unable to print the test page' error ... manifests itself in two different manners: 2 ) As soon ... 2 ) If, ... 3) Next, go back to the "Printers" window, enter Microsoft Fax or Bitfax driver properties and, under the "Details" tab, in the box named "Print to the following port", choose either the COM port onto which the modem is installed or, if not known, choose "File".
|
|
|
Purchasing supplies and accessories.
|
Where Can I Purchase Supplies and Accessories? The Canon eStore is an easy way to buy Bubble Jet printers, scanners, multifunction printers and facsimile machines , as well as supplies and accessories (like ink and paper) for these products. The eStore Web site can be found at:
|
|
|
Disconnect data cable and power cord to reset the device
|
If you've waited until the print, scan or fax (if applicable for your model) job has completed and you are certain there are no more jobs to complete, disconnect the interface (data) cable and power cord to power off the device.
|
|
|
File Size of the Scanned Image is Too Large
|
The File Size of the Scanned Image is Too Large The issue you are experiencing can be resolved in two ways: 1. Lower the scanning resolution. The lower the resolution the smaller the file size.
|
|
|
Replace the entire cartridge BJC-2000
|
Replace the entire cartridge replace the appropriate BCI ink tank. Perform two print head cleanings, and then print a Nozzle Check pattern. If the symptoms persist, replace the print head (cartridge).
|
|
|
Perform White Level calibration
|
Perform White Level calibration 1. Before you scan a document that needs extremely accurate color reproduction. 2 . If you see that the color reproduction in a scanned image is not accurate. 3. If you see that that colors in the scanned image are uneven.
|
|
|
Clean the print head BJC-2000
|
Follow these steps to perform a print head cleaning with any of the BJC-2000 series printers: Perform a self-test to see if the cleanings helped .
|
|
|
Uninstall interfering software or disable background printing
|
BJ (MP) Metafile error. Note: This is only an option. If you do not wish to uninstall the WebSearch Toolbar, please use solution # 2 .
|
|
|
Remove checkmark from Pause printing (Windows)
|
Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel,' 'Printers and Other Hardware,' and 'Printers and Faxes .'
|
|
|
Check the ink cartridge and driver settings (Windows 95/98 and Windows Me)
|
2 . Reboot your computer and reset the printer. You can reset the printer by unplugging the printer's power cord for 30 seconds and then powering the unit on again.
|
|
