| Search Results |
 |
Configure the Silex C-6700WG Print Server Through a Wireless LAN
|
Configure Through a Wireless LAN ... method, the wireless settings on the ... Verify the Wireless LED(Green ... Click Wireless CX Wireless Setup screen is ... ... to change the wireless settings on the ... If the wireless settings on the ... change the PC wireless settings to match ... Verify the wireless settings on the ... ... automatically changed the wireless settings on the ... ... this does not help , refer to ... Wireless Mode Select Infrastructure ... Wireless Mode Select AdHoc ... << If you did not change the wireless settings on the PC manually >> ... << If you changed the wireless settings on the PC manually >> ... Reset the wireless settings on the PC to match your network environment.
|
|
|
Install the i80 printer driver using the prepackaged CD (Bluetooth)
|
Install the i80 printer driver using the prepackaged CD (Bluetooth) To display the explanation about the printer port, click Help ... The printer model name is needed when authenticating a Bluetooth device in the Control Panel's Wireless Link. ... Select 'Start', 'Control Panel', 'Printers and Other Hardware', and ' Wireless Link'. In the Wireless Link ... Start', 'Control Panel', and ' Wireless Link'.
|
|
|
Close the top / front cover of the printer
|
|
Confirm that Windows XP Service Pack 1 or later and Microsoft "Support for Bluetooth Wireless Devices" are installed.
|
Confirm that Windows XP Service Pack 1 or later and Microsoft "Support for Bluetooth Wireless Devices" are installed.
|
|
|
Remove AMD USB Audio Driver Filter if installed
|
Confirm AMD USB Audio Driver Filter is installed and refer to your computer manfacturer's website for assistance .
|
|
|
Install the LK-51 Battery Kit to the Printer - iP90 / iP90v
|
Attach the LK-51 Battery Kit to the Printer Open the battery charger's cover by using a coin or a similar object to remove the cover .
|
|
|
Install the print head and inks correctly iP90.
|
Install the print head by following the procedure below. Open the paper support and paper output slot cover of the printer. <1> Paper Support
|
|
|
Clean Inside the Printer i70 / i80 / iP90
|
Clean Inside the Printer With the printer powered off, open the print head cover and clean the printer: Note: If the print head cover is opened with the printer powered on, the print head holder will move, which may cause injury, or damage to the printer.
|
|
|
Computer will not boot with device connected via USB
|
Turn off USB Emulation (legacy support) in the computer's BIOS Due to differences in the BIOS setups among different manufacturers and versions, please refer to the computer's documentation or technical support for assistance in checking and changing this setting.
|
|
|
Change the Print Quality Settings (Windows)
|
The Quality setting controls how finely ink droplets are placed on the printed page. Depending on the type of paper being used a higher Print Quality setting does not always insure a better print. Print speed will decrease as the Print Quality setting is increased. Follow the instructions below to change the print quality settings in the Canon printer driver for the Windows operating system through a printing application.
|
|
