Search Results |
|
Buttons on the iP4600
Buttons on the iP4600 Alarm lamp flashing orange: An error has occurred and the printer is not ready to print. For details, refer to the "Troubleshooting" in the on-screen manual: Advanced Guide. Power lamp flashes green once and Alarm lamp flashes orange once alternately: An error that requires contacting your Canon service representative may have occurred.
|
|
|
Disable the "Choose paper source by PDF page size option" on the Print screen
Disable the 'Choose paper source by PDF page size' option on the Print screen If you receive the error " A paper size that cannot be fed from the cassette was selected" when printing from Adobe Acrobat Reader version 9, follow the instructions below to disable automatic paper source selection from the application.
|
|
|
Delete queued print jobs to resolve printing errors (Mac OS X)
If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued jobs. Note: After confirming that the cable is connected and that the printer is powered on, perform the following. Click here for Mac OS X 10.3.x and 10.4.x instructions. In Mac OS X 10.5.x, 10.6.x
|
|
|
Delete queued print jobs to resolve printing errors (Windows)
If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued job. If the print job does not complete, it may be necessary to disconnect the printer cable, power off and on the printer and then reconnecting the cable.
|
|
|
Install the print head and ink tanks correctly iP4600
Confirm that the printer is powered on and open the paper output tray and the top cover. ... (at about one second interval): Ink tank is empty, or the printer is not ready due to an error . ... An error has occurred and the printer is not ready to print. ... If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer cannot print. ... During the print head cleaning, the Power lamp flashes green.
|
|
|
Reseat the print head and ink tanks - iP4600
How to re-install the print head / ink tanks (at about one second interval): Ink tank is empty, or the printer is not ready due to an error . ... An error has occurred and the printer is not ready to print. ... During the print head cleaning, the Power lamp flashes green.
|
|
|
Replace the ink tank(s) - iP4600
When ink runs out or an error occurs, follow the instructions below to change the affected ink tank(s): The POWER lamp flashes green during cleaning.
|
|
|
Connect the USB interface cable properly to avoid communication errors
|
|
Error : Bidirectional Support is Required for Your Printer – Windows
|
|
Power Specifications - iP4600
|