| Search Results |
 |
Configure the Silex C-6700WG Print Server Through a Wireless LAN
|
Configure Through a Wireless LAN ... method, the wireless settings on the ... Verify the Wireless LED(Green ... Click Wireless CX Wireless Setup screen is ... ... to change the wireless settings on the ... If the wireless settings on the ... change the PC wireless settings to match ... Verify the wireless settings on the ... ... automatically changed the wireless settings on the ... ... this does not help , refer to ... Wireless Mode Select Infrastructure ... Wireless Mode Select AdHoc ... << If you did not change the wireless settings on the PC manually >> ... << If you changed the wireless settings on the PC manually >> ... Reset the wireless settings on the PC to match your network environment.
|
|
|
Close the inner cover, then press RESUME
|
|
Close the top / front cover of the printer
|
|
Remove AMD USB Audio Driver Filter if installed
|
Confirm AMD USB Audio Driver Filter is installed and refer to your computer manfacturer's website for assistance .
|
|
|
Locate the Serial Number iP3600 / iP4600
|
The serial number of the printer is visible when the top cover is opened as shown below.
|
|
|
Install the print head and ink tanks correctly iP4600
|
Install the print head or ink tanks properly following the procedure below. Confirm that the printer is powered on and open the paper output tray and the top cover . Note:
|
|
|
Confirm the ink tank(s) are properly installed iP4600
|
Ensure that the ink tank is installed properly. Open the Paper Output Tray and Top Cover , and then press on the 'PUSH
|
|
|
Change the Print Quality Settings (Windows)
|
The Quality setting controls how finely ink droplets are placed on the printed page. Depending on the type of paper being used a higher Print Quality setting does not always insure a better print. Print speed will decrease as the Print Quality setting is increased. Follow the instructions below to change the print quality settings in the Canon printer driver for the Windows operating system through a printing application.
|
|
|
Reseat the print head and ink tanks - iP4600
|
How to re-install the print head / ink tanks Confirm that the printer is powered on and open the paper output tray and the top cover . (1) Put your finger in the center of the top of the Paper Output Tray and open it gently. (2) Extend to open the Output Tray Extension.
|
|
|
Check the Ink Status - iP4600
|
You can check the ink status on the ink lamps or your computer screen and with the Ink Lamps Make sure that the power is turned on, and open the Paper Output Tray gently. Open the Top Cover . Note:
|
|
