| Search Results |
 |
Initial printer setup - iX7000
|
... it with the help of another person ... ... printer when opening covers , resulting in ... ... and the Top Cover (B) ... ... If the Top Cover is left open ... In this case, close and reopen the Top Cover . ... If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Top Cover . ... Open the Clear Ink Tank Cover (A). ... 6. Close the Clear Ink Tank Cover . ... 6. Attach the Cassette Cover , then insert the Cassette against the back end of the printer.
|
|
|
Install the printer driver (LAN) - iX7000
|
LAN Installation Do not open the Top Cover (E) while printing. ... When opening the Top Cover , the Print Head Holder moves automatically if the unit is powered on. ... If you do not know your administrator name or password, click Help , then follow the on-screen instructions. ... Do not open the Top Cover (B) while printing. ... When opening the Top Cover , the Print Head Holder moves automatically if the unit is powered on.
|
|
|
Cleaning the encoder (timing) strip - iX7000
|
The timing strip contains many thin black vertical lines that help determine the carriage position during operation. ... Open the top cover . ... Gently close the top cover .
|
|
|
Close the top cover of the printer completely - iX7000
|
|
Locate the Serial Number iX7000
|
The serial number of the printer is visible when the top cover is opened as shown below.
|
|
|
Basic Steps for Restoring Network Communication with Your Printer
|
Here are some basic steps to walk through restoring network communication with your printer. This may help if you receive messages such as Printer is Offline
|
|
|
Install the cassette properly - iX7000
|
Install the Paper Cassette Properly In order to feed paper properly from the Cassette, it must be installed correctly. After loading the paper and replacing the cassette cover , slide the cassette all the way into the printer until it clicks into place.
|
|
|
Remove foreign objects - iX7000
|
Remove foreign objects from the Rear Tray Also, open the top cover of the printer and check the inside the printer. Carefully remove any paper scraps or foreign objects.
|
|
|
Reseat the print head and ink tanks - iX7000
|
How to re-install the print head / ink tanks Confirm that the printer is powered on and open the paper output tray and the top cover . (1) Put your finger in the center of the top of the Paper Output Tray and open it gently. (2) Extend to open the Output Tray Extension.
|
|
|
Install the print head and ink tanks correctly - iX7000
|
1. Open the Paper Output Tray (A) and the Top Cover (B). important:
|
|
