| Search Results |
 |
Change the display language settings - DS810
|
Changing the Language Display 1) Press <ON/OFF> to turn on the machine. 2) Press <Menu> once. 3) Display the Device settings screen.
|
|
|
Securely install the print head DS810
|
When Error 5100 is displayed on the printer LCD, the print head may not be installed properly. The print head lock lever is not locked completely. The print head lock lever is locked. Close the cover and turn on the printer.
|
|
|
Resetting the DS810 ink Counter
|
Resetting the Ink Counter If an Ink Tank is removed, the printer will output a message prompting you to confirm replacement of the Ink Tank at the start of the next print job. When an Ink Tank has been replaced, follow the procedure below to reset the ink counter. The low ink warning is only displayed properly if the ink counter is reset.
|
|
|
Installing the printer driver / software - DS810 (Windows)
|
How to install the printer driver and connect the printer via USB (Windows) 2. Set the prepackaged CD-ROM in the computer. The CD-ROM starts automatically and the following window will be displayed on the screen.
|
|
|
Clean the paper feed rollers - DS810
|
cursor button to select 'Yes', then press the <OK> button. The paper feed roller cleaning starts . If paper is not fed properly, repeat the paper feed roller cleaning up to three times.
|
|
|
Printing using a memory card - DS810
|
How to print from a memory card cursor button to specify the number of print copies, and press the <Print> button. Printing will start . Printing a Specified Area?Trimming
|
|
|
Replace the ink tank DS810
|
InkTank & Print Head Issues - DS810 or cursor button to select 'Yes', then press the <OK> button to start print head cleaning. Note
|
|
