| Search Results |
 |
The noise is normal S300 / S330
|
The following sounds are likely to be heard when the printer is turned on . They are normal operating sounds, and are not signs of malfunction:
|
|
|
The noise is normal i9100 / S9000 / S900
|
The following sounds are likely to be heard when the printer is turned on . They are normal operating sounds, and are not signs of malfunction:
|
|
|
Replace empty or incorrect ink tank(s) -S450
|
Replacing / Installing Ink Tanks 1. Make sure that the printer is turned on and open the front cover. The cartridge holder moves to the left side.
|
|
|
Install the Print Head - S820 / S820D / S830D
|
Installing the Print Head 1. Turn on the printer.
|
|
|
Enable/Disable Auto Power (Mac OS X)
|
This feature allows you to turn the printer off when no data is sent to the printer for a certain period of time.@@160@@ The Auto Power On function automatically turns on the printer upon receipt of print data from the computer.
|
|
|
Cleaning the paper feed rollers- i9100 / S9000
|
Untitled Document 1. Remove paper from the sheet feeder if there is any, and turn on the printer.
|
|
|
Set the Paper Thickness lever to the correct position S200
|
The paper thickness lever controls the amount of space between the print head and the paper. If thick paper or envelopes are being used, the Paper Thickness lever should be set to the envelope position using the following procedure: 1. Make sure that the printer is turned on by plugging in the power cord, and then open the printer's front cover. 2. Once the print head has move to the middle, slide the paper thickness lever to the right. <1> Front Cover
|
|
|
Install / Replace Ink Tanks correctly - S450
|
How to replace / install the ink tanks 1. Make sure that the printer is turned on and open the front cover. The cartridge holder moves to the left side.
|
|
|
BJ Direct Printing - S820D / S830D / S530D
|
BJ Print Direct Turn on the printer. Make sure the digital camera is turned off.
|
|
|
Disconnect data cable and power cord to reset the device
|
If you've waited until the print, scan or fax (if applicable for your model) job has completed and you are certain there are no more jobs to complete, disconnect the interface (data) cable and power cord to power off the device. If the device powers off, press <ON/OFF> to power the device back on. Reconnect the interface cable (and telephone line cord - if applicable) to the device. Turn on the computer.
|
|
