| Search Results |
 |
How to Toggle the IPv6 and Wireless LAN DRX Settings
|
If your MAXIFY printer is not detected by any wireless devices after it has been connected to a wireless LAN, disabling IPv6 on the printer may correct the issue. Follow the steps below to disable IPv6.
|
|
|
The printer cannot be detected (the message that the printer could not be detected on the network is displayed)
|
During the wireless setup in the ... 1. Before checking the wireless setting ... Please do the wireless setting again. ... The operation of the "Firewall" security software may interfere with the communication for the wireless setup. ... Before disabling the "Firewall" operation of the security software, disconnect from the Internet. ... As the following setting interferes with the communication for the wireless setup, change the setting. ... Disable the privacy separator or the network disconnection function.
|
|
|
Print and Understand a Wireless Network Settings Page
|
Before you begin So long as your printer has power, ink, and paper, you should be able to print this page even if you are unable to print from your computer or mobile device, as this page is printed using the printer panel itself. ... If a new page does not appear after your model is selected from the drop-down menus, you may need to temporarily disable your pop-up blocker.
|
|
|
Wi-Fi Connection Assistant Guide
|
Wi-Fi Connection Assistant Guide(IJ Network Device Setup Utility Guide)
|
|
|
Using the Wi-Fi Connection Assistant - Windows
|
Starting Up Wi-Fi Connection Assistant
|
|
|
Information on Checking Printer Connection Status Using Wi-Fi Connection Assistant (Windows)
|
Checking Printer Connection Status Using Wi-Fi Connection Assistant
|
|
|
Devices Which May Interfere with Wi-Fi Communication
|
Devices which may interfere with Wi-Fi communication
|
|
|
AirPrint for iPhone or iPod Touch
|
Before you begin AirPrint works with Wi-Fi ® or wired network connections. AirPrint is not supported if an iOS device is connected to the USB port of an AirPort base station or Time Capsule, or to a computer via Bluetooth.
|
|
|
AirPrint for iPad With iPadOS 13.1
|
Before you begin AirPrint works with Wi-Fi ® or wired network connections. AirPrint is not supported if the iPad is connected to the USB port of an AirPort base station or Time Capsule, or to a computer via Bluetooth.
|
|
|
Wireless LAN connection of your printer to an access point using WPS - MB2320 / MB5020 / MB5320
|
Solution Wireless Setup Using WPS ( Wi-Fi Protected Setup) Before Starting Wireless Connection Setup
|
|
