Search Results |
|
2018 CANON PROJECTOR LINE-UP
... DCI Resolution (4096 x 2160) • 6000 Lumens with up to 22,000:1 Dynamic Contrast Ratio* 2 • Laser Light Source with 20,000 Hours* 3 • Compact and Lightweight Design • Multiple Genuine Canon Interchangeable Lens OptionsProvideExceptionalQualityandFlexibility • High Dynamic Range (HDR) Compatible • HDBaseT™ & Wi-Fi ® • MotorizedLensShift,4-pointKeystoneCorrection and Lens Position • Built-in Edge Blending • Versatile Connectivity including HDMI (x 2 ) • Multiple Image Modes including DICOM® Simulation Mode* 1
|
|
|
Sharing connection (iOS) Rayo S1
" icon to switch to waiting mode. 2 . In the Wi-Fi setting on the iOS device, select a name of device to connect and connect to the Wi-Fi network. ※ The device name is shown as "MINI-xxxx."
|
|
|
Using the Browser Rayo S1
1. Click the "Setting" icon on the Home screen, select Wi-Fi from the Setting screen, and press the switch to enable the feature. 2 . Select the Wi-Fi you want to connect to from the list of available Wi-Fi network list. Enter the password for a locked connection.
|
|
|
Mirroring connection (Windows OS) Rayo S1
2 . Turn on the Wi-Fi on your computer. (No need for an Internet connection.)
|
|
|
Using PC-Free Multi Projection WUX7500 / WUX6700 / WUX5800
Using PC-Free Multi Projection A JPEG image on a USB flash drive can be divided among up to nine projectors and combined into a single, large image. When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary projector and the other eight, Secondary projectors. The image as a whole is controlled by the Primary projector PC-free multi projection is not available over a wireless LAN. This feature is available with the following number of projectors and layout patterns. The projector you assign as the Primary projector, identified in the layout pattern as [1], always projects the upper-left image. Set up the projectors as follows. 1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries. Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Secondary]. Complete this setting on each Secondary projector 4 Configure one projector as the Primary projector. (1) Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Primary]. ( 2 ) Configure the following settings in [PC-free multi projection].
|
|
|
Wireless LAN (Wi-Fi) Legal information WUX7500 / WUX6700 / WUX5800
WUX7500/WUX6700/WUX5800 Frequency band(s): 2 ,401 MHz – 2 ,473 MHz Maximum radio-frequency power: 12.7 dBm
|
|
|
Hazard Distance When Equipped with a Replacement Lens (IEC 62471-5) WUX7000Z / WUX6600Z / WUX5800Z
• During projection, looking into the lens from distances closer than this poses a risk of vision impairment or other serious injury. ... projection lens with a hazard distance indicated on it is used with the projector, the operator shall either install the product at a height that will prevent eye exposure within the hazard distance or control access to ensure that persons do not approach within the hazard distance. ... Beam divergence: 2 ° ... • For assistance when disposing of the projector, contact the Canon Customer Support Center.
|
|
|
Precautions for Use LX-HM502Z
... into the projector lens . ... as Risk Group 2 (RG 2 ) according to ... For assistance when disposing of ... ... front of the lens during Prohibition ... Do not touch the lens with bare hands. Any smudges or fingerprints on the lens may affect image quality. ... If the projector is abruptly taken to a warmer location, or if the room temperature rises abruptly, moisture in the air may condense on the lens and mirror, causing the image to become blurred. ... Leave a gap of at least 2 cm (0.8") from the bottom of the projector.
|
|
|
Mirroring connection (Android OS) Rayo S1
To use the mirroring function, turn on the Wi-Fi in Device Settings. Make sure that Wi-Fi is turned ON. 2 . Switch the smart device to Mirroring mode. ... ❶ Turn on the Wi-Fi on the smart device. ... (e.g., Screen mirroring, Smart View, Miracast, Wireless Display, and Smart View.)
|
|
|
Application (My App) Rayo S1
You can set up a Wi-Fi connection to a Cannon digital camera to project images and videos from the camera on to the projector. ... You can only use this feature for Cannon digital cameras that supports Wi-Fi connections (some do not support Wi-Fi connection). ... For more about how to use it, see Help in the application or visit the website (https://www.wps.com/android).
|
|