| Search Results |
 |
Menu Description Zoom WUX7000Z / WUX6600Z / WUX5800Z
|
Press the [ ] button on the remote control to project images at a reduced size, and press the [
|
|
|
Projecting Two Images Side by Side WUX7000Z / WUX6600Z / WUX5800Z
|
Press the INPUT button, and then select the input signal for the side with control rights. To determine which side is currently under your control , check the image ID in orange in the upper right of the menu. The side without control rights is labeled with a white circle.
|
|
|
Connect to Other Equipment WUX7000Z / WUX6600Z / WUX5800Z
|
Press the ZOOM button on the remote control to adjust the image size, and press the FOCUS button to adjust the focus. You can also press the LENS button on the projector once to adjust focus and twice to adjust image size.
|
|
|
Projecting an Image in the DICOM SIM Mode WUX7000Z / WUX6600Z / WUX5800Z
|
It may take approximately 30 minutes until the projection brightness of this projector becomes stabled. Switching the mode to the DICOM SIM Mode 1 Press the IMAGE button on the remote control until [DICOM SIM] is displayed or select [DICOM SIM] from [ Image mode] in the [ Image adjustment] menu.
|
|
|
Using PC-Free Multi Projection WUX7000Z / WUX6600Z / WUX5800Z
|
When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary projector and the other eight, Secondary projectors. The image as a whole is controlled by the Primary projector.
|
|
|
Zooming Part of an Image WUX7000Z / WUX6600Z / WUX5800Z
|
• Focusing on the current subject. Press the + D.ZOOM button on the remote control to enlarge a part of the image . Press the – D.ZOOM button to reduce the image size.
|
|
|
Connecting to a Network WUX7000Z / WUX6600Z / WUX5800Z
|
Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary.
|
|
|
Menu Description Marginal focus WUX7000Z / WUX6600Z / WUX5800Z
|
In dome projection, image focus can be adjusted on the edges of the screen, and the remote control can be used to activate and deactivate this focus adjustment. For detailed instructions, refer to “Adjusting Peripheral Focus”
|
|
|
Menu Description Image priority WUX7000Z / WUX6600Z / WUX5800Z
|
|
Menu Description Reset WUX7000Z / WUX6600Z / WUX5800Z
|
> [ Image adjustment] > [Reset] Restore the current image quality settings to the factory defaults. • Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile.
|
|
