| Search Results |
 |
Using PC-Free Multi Projection WUX7000Z / WUX6600Z / WUX5800Z
|
1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries.
|
|
|
Hazard Distance When Equipped with a Replacement Lens (IEC 62471-5) WUX7000Z / WUX6600Z / WUX5800Z
|
• During projection, looking into the lens from distances closer than this poses a risk of vision impairment or other serious injury. ... projection lens with a hazard distance indicated on it is used with the projector, the operator shall either install the product at a height that will prevent eye exposure within the hazard distance or control access to ensure that persons do not approach within the hazard distance. ... Beam divergence: 2 ° ... • For assistance when disposing of the projector, contact the Canon Customer Support Center.
|
|
|
Controlling the Projector from a Computer WUX7000Z / WUX6600Z / WUX5800Z
|
2 Launch a web browser, enter “http://(projector IP address)” in the address bar, and press the Enter key. ... The factory default IP address is “192.168.254.254” for wired connections and “192.168.253.254” for wireless connections.
|
|
|
Connecting to a Network WUX7000Z / WUX6600Z / WUX5800Z
|
Connection Methods The projector can be connected to a wired network with a LAN cable or to a wireless network via Wi-Fi . Wired Networks
|
|
|
Advanced adjustment Fine-tune noise reduction and color tone. WUX7000Z / WUX6600Z / WUX5800Z
|
* A type of noise affecting image edges or areas where colors change significantly, either on JPEG images or in MPEG video. This setting is not displayed for HDMI, HDBaseT, DisplayPort, Digital PC, Analog PC-1, Analog PC- 2 , or Component input signals. Dynamic gamma
|
|
|
Projecting Two Images Side by Side WUX7000Z / WUX6600Z / WUX5800Z
|
|
Basic Wireless Network Settings [Wireless] WUX7000Z / WUX6600Z / WUX5800Z
|
Basic Wireless Network Settings [ Wireless ] WUX7000Z / WUX6600Z / WUX5800Z
|
|
|
Adjusting Keystone Distortion WUX7000Z / WUX6600Z / WUX5800Z
|
Adjusting Keystone Distortion Two types of correction are available: horizontal/vertical correction and corner correction. Use horizontal/vertical keystone correction to adjust image width or height distortion separately, and use corner correction to adjust the position of each corner of the image.
|
|
|
Menu Description High altitude WUX7000Z / WUX6600Z / WUX5800Z
|
High altitude Switch the fan mode to suit installation at low or high altitudes (above 2 ,300 m [7,545.8']). Incorrect settings may shorten the useful life of the projector components
|
|
|
Menu Description Keystone WUX7000Z / WUX6600Z / WUX5800Z
|
Two types of keystone correction are available: horizontal/vertical keystone and corner adjustment. Keystone correction can also be reset. Keystone correction can also be applied by pressing the KEYSTONE button on the remote control.
|
|
