| Search Results |
 |
Using PC-Free Multi Projection WUX7000Z / WUX6600Z / WUX5800Z
|
1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries.
|
|
|
Connecting to a Network WUX7000Z / WUX6600Z / WUX5800Z
|
Connection Methods The projector can be connected to a wired network with a LAN cable or to a wireless network via Wi-Fi . Wired Networks
|
|
|
Basic Wireless Network Settings [Wireless] WUX7000Z / WUX6600Z / WUX5800Z
|
Basic Wireless Network Settings [ Wireless ] WUX7000Z / WUX6600Z / WUX5800Z
|
|
|
Controlling the Projector from a Computer WUX7000Z / WUX6600Z / WUX5800Z
|
The factory default IP address is “192.168.254.254” for wired connections and “192.168.253.254” for wireless connections. If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu
|
|
|
Advanced adjustment Fine-tune noise reduction and color tone. WUX7000Z / WUX6600Z / WUX5800Z
|
* A type of noise affecting image edges or areas where colors change significantly, either on JPEG images or in MPEG video. This setting is not displayed for HDMI, HDBaseT, DisplayPort, Digital PC , Analog PC -1, Analog PC -2, or Component input signals. Dynamic gamma
|
|
|
Terminals and Connectors WUX7000Z / WUX6600Z / WUX5800Z
|
Connects the external monitor output from a computer. Receives digital PC signal (Digital PC ).
|
|
|
Connect to Other Equipment WUX7000Z / WUX6600Z / WUX5800Z
|
The currently active input signal is marked with a green circle and enclosed by a orange border. Names of input signals available for projection are displayed in white, and unavailable signal names are grayed out. • [Digital PC ] and [Analog PC -1] may be grayed out even when available.
|
|
|
Menu Description Zoom WUX7000Z / WUX6600Z / WUX5800Z
|
• Switching to lenses other than the Short Fixed Lens (RS-SL03WF) or the Ultra-wide Zoom Lens (RS-SL06UW) will reset the setting to 100%. • The zoom function is not available when [Digital PC ], [Analog PC -1], or [Analog PC -2] is selected.
|
|
|
Hazard Distance When Equipped with a Replacement Lens (IEC 62471-5) WUX7000Z / WUX6600Z / WUX5800Z
|
• For assistance when disposing of the projector, contact the Canon Customer Support Center. Do not disassemble the projector yourself when disposing of it.
|
|
