• Laser parameters Wavelength: 450 nm – 460 nm Maximum power : 144 W ... • For assistance when disposing of the projector, contact the Canon Customer Support Center.
• An invalid button is pressed in [BLANK], [FREEZE], or [D.ZOOM] mode. • When positional lock (P150) is set to [On] and buttons locked by this feature are pressed. • When the projector is already on and the POWER button is pressed.
The factory default IP address is “192.168.254.254” for wired connections and “192.168.253.254” for wireless connections. If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu
To avoid blocking access, you can configure this setting to exclude HTTP communication from IPsec. • [Standby power setting] is set to [Normal] and cannot be changed when IPsec is enabled. • Enabling IPsec will require correct IPsec settings on other devices connected to the projector, such as computers.
1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries.
• If the projector is unused for an extended time, unplug the projector from the power outlet. • Do not project the same image for a long time. An afterimage may remain on the LCD panels due to the characteristics of the panels of the projector.