Search Results |
|
Specifications (P-215)
... and White, Error Diffusion, 256 ... Weight Approximately 1 kg (2.20 lb) Power Supply Using USB bus power (USB 2.0: 500mA (communication cable only), 1 A (in combination with power supply USB cable); USB 3.0: 900mA) Using AC adapter (sold separately): 6 V DC , 800mA Power Consumption USB Cable Only USB 2.0
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
Error [P***] Paper jammed in scanner Error [C***] Scanner cover is open Error [J***] Paper feed error detected Error [J***] A document was skewed Error [D***] A double paper-feed has occured Error [J*** ] Staple was detected Error [J***] Dust was detected Error [U***] The count does not match Error [ E ***] Scanner hardware problem
|
|
|
DR Scanner driver not found / TWAIN Error
While attempting to scan you receive the error message "Driver not found" or a TWAIN error . Do you know if a Windows update was applied recently? If so, it is possible that the .INI
|
|
|
Check Error Message on Control Panel (DR-G1130/G1100)
When document feeding is interrupted, an error message will appear on the display panel.
|
|
|
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors - DR-M1060 / DR-M1060 II
When paper jams and skewed documents are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Paper jam error code Skew, staple, or feed error detection error code.
|
|
|
Error "Cannot load driver" when using the DR-C225W
If you are connected via USB and receive this message, make sure the Wireless button on the back of the scanner is set to "OFF". By default, it is set to "ON" and you will receive this error message if trying to use the scanner via USB.
|
|
|
Paper Jams (DR-2020U)
If a paper jam occurs while scanning from the feeder, an error message appears on the display panel. Follow the procedure below to clear the jam.
|
|
|
Clearing a Paper Jam (DR-M160)
When paper jams and double feeds are detected during scanning, the following error codes are displayed in the scanner's display panel and scanning is interrupted. Be careful when removing jammed paper, take care not to cut your hand on the edges of the paper. Remove any documents that have been left in the feed tray.
|
|
|
Handling a Double Feed (DR-G1130/G1100)
Handling a Double Feed When a double feed is detected while scanning, the document pages for which double feeding was detected are ejected at the eject outlet, an error message appears on the Control Panel display, and feeding stops. When a double feed is detected, the following process occurs, and messages appear according to the Rapid Recovery System setting in the ISIS/TWAIN driver.
|
|
|
Count-Only Mode (DR-G1130/G1100)
Verify Scan The scanner compares the document page count obtained from the Count-Only mode (or entered manually) with the actual count of document pages scanned, and an error message is displayed if the two counts do not match.
|
|