Search Results |
|
Using the scanner push-buttons (8600F)
Using the Scanner Buttons [COLOR] Button Scans color images in A4 or Letter size* at 300 dpi. [BLACK & WHITE] Button
|
|
|
Calibrating the scanner (4400F, 8600F, LiDE 600F, LiDE 70)
Calibrating the Scanner (4400F, 8600F, LiDE 600F, LiDE 70) Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the Calibration button starts the calibration process, which adjusts the scanned image to the proper coloration.
|
|
|
Determine Scan Resolution Settings
How to set the resolution For color images , set the resolution at half of what you set for the printer. For example, if you use a 600 dpi color printer, you should scan your document at 300 dpi.
|
|
|
Adjusting Color Mode and Output (Scan) Resolution (LiDE 600F, LiDE 70, LiDE 90, 4400F, 8600F, 8800F)
Color Mode Color Mode ... whether the scanned image is reproduced as ... , Grayscale, Color , Color (48bit ... or Text Enhanced image . Select a Color Mode that corresponds ... which the scanned image will be put ... Explanation of Color Mode Options It expresses images in two colors , black and ... ... value at which image data is either ... ... photos or monochrome images . It expresses images in 254 shades ... Color (Photos) ... mode to scan color photos. It expresses images in 256 colors (8 bits ... (lue) color channel. Color (Documents)
|
|
|
Scanning Film using the Scanner Push-Buttons (4400F, 8600F, LiDE 600F)
After you change a CanoScan Toolbox setting, that setting is used to scan the next time a scanner button is pressed. * Only 35 mm color films can be scanned with the scanner buttons or CanoScan Toolbox. Monochrome films cannot be scanned with these methods.
|
|
|
Reset Color Tone settings to default (4400F, 8600F, 8800F, LiDE 600F, LiDE 70, LiDE 90)
If not already in Advanced Mode, click on the 'Advanced Mode' tab. If you just want to reset the Color Tone settings, click on the 'Reset' button below the Image Settings section.
|
|
|
Scanning multiple items simultaneously using CanoScan Toolbox (LiDE 70, LiDE 600F, 4400F, 8600F)
* If [Recommended] or [ Color Matching] is selected in the [ Color Settings] sheet of the [Preferences] window, Auto Tone adjustment is performed for each image individually.
|
|
|
Scanning Bit Depth Specifications
Scanning Bit Depth Specifications 3000ex Color 48-bit in / 24-bit out GrayScale 16-bit in / 8-bit out
|
|
|
Adjust the graphics display settings
Adjusting the Display Settings Set the colors to Thousands or higher.
|
|
|
How to Display the Scanner Driver when Scanning through the CanoScan Toolbox
How to Display the Scanner Driver when Scanning through the CanoScan Toolbox • If you have selected Color /A4 and more than 1200 dpi in the ScanGear window, a warning message will display and you will not be able to proceed with the scan. Select a smaller paper size and lower resolution.
|
|
|