Ask a Question
FiltersClear
CMS-CATEGORY_REF
CANON (14)
Content Source
Articles (14)
Products
Check Scanners (14)
imageFORMULA CR-190i II Check Transport (4)
imageFORMULA CR-150 Check Transport (3)
imageFORMULA CR-120N Check Transport (1)
imageFORMULA CR-L1 Check Transport (3)
imageFORMULA CR-190i Check Transport (4)
imageFORMULA CR-135i High-Volume Check Transport (3)
 
 
Pages [Next]
Search Results
CMS-XML How do I turn on/off the CR-L1 scanner?
To turn the scanner ON, slide the power switch to the right. When you turn ON the power, the power LED flashes slowly, and then turns solid.
CMS-XML Turning the scanner ON - CR135
To turn ON the scanner, press the Power Switch to the "I" position. When you turn ON the power, the power LED lights blue and remains lit. IF the scanner does not work, or the power LED continues to flash, there is a problem with the scanner.
CMS-XML How does the RP-10 connect to a computer?
To turn the printer ON (or OFF), press the Power Button. When you turn ON the power, the Status LED is lit green. If the power cannot be turned ON, or the Status LED blinks or is lit red even when the paper is properly loaded, there is a problem with the printer and it may need to be serviced.
CMS-XML How can I do a test print with the RP-10?
Follow these steps to perform a test print of the RP-10: Press and hold the Power Button to turn OFF the printer (if the printer is currently powered ON). Press the Power Button while pressing the Feed Button to turn ON the power.
CMS-XML Cleaning with the Cleaning Cards - CR135
Disconnect the scanner and computer. Turn ON the scanner while pressing the START button and the STOP button. If the scanner turned ON properly, the power LED continues to flash.
CMS-XML How do I configure my CR-120N as a network device?
Select the CR-120 scanner in the list and click on [Properties]. This will bring up the Scanner Properties window. Here is where you would set the [Scanner Name].
CMS-XML What are the printer driver options available for the RP-10?
Click the Windows Start button, and then click [Control Panel]. Click [View devices and printers] under [Hardware and Sound]. Right-click the [Canon RP10] icon, and then select [Preferences].
CMS-XML How to install RangerFlex (CR-L1) on a Mac
That's it. After that, plug in the scanner for power and to the Mac. Start the app "RangerFlex".
CMS-XML Scan Procedure - CR135
Scan Procedure Carefully align the edges of the document. Place the first page of the document facing you, and place the leading edge of the document into the scanner. Adjust the Eject Stopper in accordance with the document.
CMS-XML Document Feeding - CR190
To avoid paper jams, damage to documents, and a scanner malfunction, do not feed the following types of paper into the scanner. If you want to scan these types of paper, first make a copy, and then scan the copy.
Pages [Next]