| Search Results |
 |
How to check/reset the page count of your DR-G2xxx series scanner
|
There are 2 methods which you can use to check and/or reset your roller page counts for your DR-G2xxx series scanner: Directly from the control panel of the scanner. If the scanner is connected via USB, you can use the "imageFORMULA Driver Setting Tool".
|
|
|
What type of barcodes can my DR-G2xx0 series scanners read?
|
Barcode Types Checksum EAN/JAN 8 or 13 Modulus 10, Weight 3 Codabar 3 to 32 (including Start/Stop characters) Modulus 16, 7 DR Code 39 3 to 32 (including Start/Stop characters (Standard ASCII or Full ASCII) Modulus 43 ITF 2 to 32 (even numbers of digits only) Modulus 10,Weight 3 Code 128 1 to 32 (valid data only) Modulus 103 UPC-A 13 Modulus 10, Weight 3 UPC-E 8 Modulus 10, Weight 3
|
|
|
How do I connect my DR-G2000 series scanner to my computer?
|
Connect the power cord into an AC Outlet. ( 2 )
|
|
|
What are some of the scanning detection features available on my DR-G2xx series scanner?
|
Ultrasonic Double Feed Detection The scanner stops feeding when the ultrasonic sensor detects that two or more document pages are feeding at the same time. *A non-detection area can be specified to avoid double-feed detection in areas such as those containing adhesive labels.
|
|
|
How do I create a scanning shortcut using CaptureOnTouch v4 for my DR scanner?
|
You can click on the pencil icon to adjust the settings that you need or, if you wish, click on "New document" to create a new set of specific settings that you require. Select the output type you wish to you by clicking on it (see step 2 below). You can also edit the settings of the output by clicking on the pencil icon.
|
|
|
How can I scan a delicate or thin document without damaging it? Use a carrier sheet.
|
The maximum thickness of documents that can be scanned in the carrier sheet is 127 g/m 2 (0.15mm). Documents thicker than 127 g/m2
|
|
|
Removing and Reinstalling the Rollers - DR-G2xxx series scanners
|
Place the new feed roller on the pin. Put the feed roller in place (1), and align the notch in the roller's axle with the shaft on the scanner ( 2 ). Push the roller lock lever up to lock the feed roller.
|
|
|
Why are some of the driver settings grayed out on my DR-G2xx0 Series Scanner?
|
When [Mode in case of binary] on the [Settings for in case of binary] tab is set to [Advanced Text Enhancement], [Advanced Text Enhancement II], or [Active Threshold] 2 ) Not available for setting if either one of the following two conditions are met. [Detection mode] in the [Auto Image Type Detection Settings] dialog box is set to [Color or Gray]
|
|
