| Search Results |
 |
Why are some of the driver settings grayed out on my DR-G2xx0 Series Scanner?
|
... and White O Error Diffusion O Advanced Text Enhancement X Advanced Text Enhancement II ... ... White O O Error Diffusion O O Advanced Text Enhancement O O Advanced Text Enhancement II ... ... O O O Error Diffusion O X ... O O O Advanced Text Enhancement O ... O O O Advanced Text Enhancement II ... ... set to [ Advanced Text Enhancement], [ Advanced Text Enhancement II ... 2 ) Not available ... of the following two conditions are met ... ... set to [ Error Diffusion] Detect automatically X Black and White O Error Diffusion O Advanced Text Enhancement O Advanced Text Enhancement II O ...
|
|
|
What are some of the scanning detection features available on my DR-G2xx series scanner?
|
Detects dust in the scanning unit and performs error processing as needed. ... The scanner stops feeding when the ultrasonic sensor detects that two or more document pages are feeding at the same time.
|
|
|
Removing and Reinstalling the Rollers - DR-G2xxx series scanners
|
Put the feed roller in place (1), and align the notch in the roller's axle with the shaft on the scanner ( 2 ). ... Failure to firmly close the roller holder and roller cover may cause a feed error .
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
|
When an error occurs in the scanner, you will see the following error message on the display panel.
|
|
|
How do I correct an "Out of memory" error? My PC has enough memory.
|
If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through/Remove Background] if they are set to on.
|
|
|
How to check/reset the page count of your DR-G2xxx series scanner
|
There are 2 methods which you can use to check and/or reset your roller page counts for your DR-G2xxx series scanner: Directly from the control panel of the scanner. If the scanner is connected via USB, you can use the "imageFORMULA Driver Setting Tool".
|
|
|
What type of barcodes can my DR-G2xx0 series scanners read?
|
Barcode Types Checksum EAN/JAN 8 or 13 Modulus 10, Weight 3 Codabar 3 to 32 (including Start/Stop characters) Modulus 16, 7 DR Code 39 3 to 32 (including Start/Stop characters (Standard ASCII or Full ASCII) Modulus 43 ITF 2 to 32 (even numbers of digits only) Modulus 10,Weight 3 Code 128 1 to 32 (valid data only) Modulus 103 UPC-A 13 Modulus 10, Weight 3 UPC-E 8 Modulus 10, Weight 3
|
|
|
Cleaning the Scanning Glass, Roller, and Pad (DR-Gxxxx series scanners)
|
Cleaning the Scanning Glass, Roller, and Pad Scratches on the scanning glass may cause spots or streaks on scanned images, as well as feeding errors . If you find a scratch on the scanning glass, contact your local authorized Canon dealer or service representative to have the glass replaced.
|
|
|
How do I connect my DR-G2000 series scanner to my computer?
|
Connect the power cord into an AC Outlet. ( 2 )
|
|
|
What is Double Feed detection (and how do I enable it)?
|
Open the scanner driver's setting screen. Open the [ Error Detection] tab. Select either the [Detect by length] or the [Detect by Ultrasonic] check box (or both).
|
|
